24/7 emergencies 814 777 6921812 230 6079WhatsApp 811 786 0768
Electrónica MonterreyElectrónica MonterreyLaboratorios Creativeit Talk to an engineer
Menu

What are thermal level and range?

They are the two settings that determine which temperature interval is spread across the colors of the image: the range or span is the width of the interval, and the level is the central point around which it is placed.

Definition

The display has only a limited number of colors, while the scene can contain many temperatures. The range (or span) is the temperature interval spread across all the colors of the palette, and the level indicates the position of that interval on the scale, normally its center. Raising the level shifts the window toward higher temperatures; reducing the range narrows it.

What changes and what does not

  • Contrast changes: with a narrow range, small differences occupy many colors and look large.
  • What saturates changes: anything outside the interval appears in the extreme color, with no detail.
  • The measurement does not change: a pixel’s temperature is the same at any level and range.

Automatic and manual

In automatic mode, the camera adjusts level and range to the scene, usually between the minimum and the maximum. This is convenient but unstable: a very hot source in a corner stretches the range and flattens the contrast of everything else. In manual mode, the operator sets level and range, and can lock them to compare images of several pieces of equipment on the same scale.

How to use them when inspecting

  1. Start in automatic to get an overview.
  2. Switch to manual and narrow the range around the temperatures of interest, to bring out differences between similar components.
  3. Widen the range to verify that the difference is not an artifact of the setting.
  4. Document with the same range in the images that will be compared.

Not to be confused with the measurement range

Many cameras also have a selectable measurement range, which is the temperature interval for which the reading is calibrated. This is something else: if the object is outside the chosen interval, the measurement is not valid. Level and span change only the display. In a report, the image scale must show its extreme values.

We do real tests, on video! Watch them on our YouTube channel →

Do you have a problem nobody has been able to measure?

Talk directly to the engineer in charge, with no middlemen.

Talk to an engineer