24/7 emergencies 814 777 6921812 230 6079WhatsApp 811 786 0768
Electrónica MonterreyElectrónica MonterreyLaboratorios Creativeit Talk to an engineer
Menu

Short-Range or Long-Range Low-Power Wireless Communication?

Short-range communication offers higher speed and lower latency over short distances, while long-range low-power communication sacrifices speed to reach far with very little consumption; the choice depends on distance, data volume and power supply.

What is being traded

The range of a link is determined by the power budget: transmitted power, antenna gains and receiver sensitivity against path loss. To reach farther with little power, sensitivity is improved, and sensitivity improves by reducing the data rate and bandwidth, because less noise gets in and robust modulations can be used. That is the underlying reason why range and speed work against each other.

Short range

  • High speeds and low latency.
  • Suitable for continuous data streams, audio, local configuration or nearby devices.
  • Low consumption thanks to brief transmissions, but the node must be close to a gateway or form a mesh.

Long range and low power

  • Coverage of long distances with a single station, at low data rates and with short messages.
  • Intended for sensors with long-life batteries that transmit sporadically.
  • High and irregular latencies; not appropriate for real-time control.
  • Channel occupancy time limits in unlicensed bands restrict how many messages each node can send.

How to choose

  1. Distance and obstacles: if all nodes are within a few meters of a gateway, extreme range is not needed.
  2. Data volume and frequency: one value every so often is compatible with low speeds; a continuous stream is not.
  3. Power supply: with batteries and a service life of years, consumption per message and duty cycle rule.
  4. Tolerable latency: alarms and control require a fast response.
  5. Radio environment: interference, concrete and metal reduce actual range compared with theoretical range.

How to interpret range figures

The distances quoted by manufacturers usually refer to ideal line-of-sight conditions. A coverage study at the site gives the effective range, which depends on the obstacles and on antenna height.

We do real tests, on video! Watch them on our YouTube channel →

Do you have a problem nobody has been able to measure?

Talk directly to the engineer in charge, with no middlemen.

Talk to an engineer