Why the risk is different
The high voltage in an electric vehicle is DC, capable of delivering very high currents, and comes from a battery that cannot be switched off completely: as long as it is connected, the circuit is energized. In addition, the floating system means that touching a single conductor does not necessarily produce a current, which gives a false sense of security; a second fault or contact with the other pole is enough.
Principles of the procedure
- Qualified personnel: only those with specific training in vehicle high voltage and authorization to intervene.
- Manufacturer’s documentation: each vehicle has its own deactivation procedure, with the location of the service disconnect and the waiting times.
- De-energization: the system is deactivated, the service disconnect element is removed, and the capacitors are left to discharge for the time the manufacturer indicates.
- Lockout and tagging: the removed element stays under the control of the person doing the work, so that nobody reconnects it.
- Verification of absence of voltage: with an instrument of suitable measurement category, tested before and after on a known source. Never assume the vehicle is de-energized just because it is switched off.
- Protective equipment and insulated tools suitable for the voltage level.
Situations that increase the risk
- Crashed vehicles or those with a damaged battery, which may have compromised insulation or a risk of thermal runaway.
- The presence of water or moisture.
- Working alone, with nobody who can give assistance or cut the supply.
What to check first
Before opening any orange component, identify the vehicle, review the warnings and confirm the procedure. This guide describes principles and does not replace training, the applicable regulations or the manufacturer’s manual. This work must only be done by qualified persons.