24/7 emergencies 814 777 6921812 230 6079WhatsApp 811 786 0768
Electrónica MonterreyElectrónica MonterreyLaboratorios Creativeit Talk to an engineer
Menu

How should you respond to an electrical accident?

In an electrical accident the first priority is not to become another victim: cut the power or separate the person using insulating means, call for emergency help, assess breathing and pulse and begin resuscitation if needed.

The scene first, then the victim

If the person is still in contact with an energized source, touching them can cause the current to pass through the rescuer as well. Before approaching, you must make sure there is no electrical hazard.

Response sequence

  1. Cut the power at the nearest accessible disconnecting device, if it is safe to do so.
  2. If the power cannot be cut: separate the victim only with a dry insulating means (for example, a hot stick or a non-conductive object), without touching them directly, and only if the voltage is low. With high voltage, nobody should approach until qualified personnel confirm that the circuit has been de-energized and grounded.
  3. Call for emergency help immediately; one person should take charge of that call.
  4. Assess responsiveness, breathing and pulse.
  5. If the person is not breathing or has no pulse: begin cardiopulmonary resuscitation and use an automated external defibrillator if one is available, following its prompts, until medical help arrives.
  6. Treat injuries: cover burns with a clean, dry dressing, without applying ointments or direct ice; immobilize the person if a fall injury is suspected.

Why every victim must be assessed in a hospital

Current can damage deep tissue and disturb the heart rhythm hours later, even if the person looks well and speaks normally. Visible skin burns tend to underestimate the internal damage. That is why anyone who receives a shock, however minor it seems, must be assessed by a doctor.

What should have been prepared beforehand

  • An emergency plan known to the team, with phone numbers and evacuation routes.
  • Clearly marked locations of emergency disconnects.
  • Personnel trained in first aid and resuscitation.
  • Rescue equipment and a defibrillator accessible in critical areas.

After the event

The scene is preserved whenever possible, the appropriate people are informed and the cause is investigated to prevent a recurrence. Nobody should re-energize the equipment until qualified personnel have reviewed it.

Rescues in energized installations and medical care are the responsibility of qualified personnel and emergency services, in accordance with the applicable regulations.

We do real tests, on video! Watch them on our YouTube channel →

Do you have a problem nobody has been able to measure?

Talk directly to the engineer in charge, with no middlemen.

Talk to an engineer