24/7 emergencies 814 777 6921812 230 6079WhatsApp 811 786 0768
Electrónica MonterreyElectrónica MonterreyLaboratorios Creativeit Talk to an engineer
Menu

How is a wind turbine monitored?

A wind turbine is monitored by measuring vibration at its bearings, gearbox and main components, with fixed sensors and analysis that takes into account that speed and load change constantly with the wind.

Why it differs from an industrial machine

A wind turbine operates with variable speed and load dictated by the wind, often in remote, hard-to-reach locations. Routes with a portable data collector are impractical, so monitoring is usually continuous, with installed sensors and remote analysis.

Which components are monitored

  • The main rotor bearing, which turns slowly and generates weak signals.
  • The gearbox, with gears and bearings running at various speeds.
  • The generator and its bearings.
  • The tower and the nacelle, in terms of their structural response.

How the measurement is adapted

  • Fault frequencies depend on rotational speed, so spectra are normalized by speed (order analysis) or grouped by operating ranges.
  • Power, speed and other process parameters are recorded along with the vibration, so that only equivalent conditions are compared.
  • For low-speed components, sensors and techniques with good low-frequency response are used.

What faults are looked for

Bearing defects, wear or pitting in gears, unbalance or misalignment of the rotor, and problems in the generator. The data are compared with trends and with band alarms.

How to interpret the result

Without normalizing for speed and load, a change in the wind can look like a fault. That is why a reliable diagnosis is based on the trend under comparable conditions and is confirmed with other techniques, such as oil analysis.

Work at height and on equipment with stored electrical or mechanical energy must be carried out by qualified personnel and in accordance with the applicable regulations and safety procedures.

We do real tests, on video! Watch them on our YouTube channel →

Do you have a problem nobody has been able to measure?

Talk directly to the engineer in charge, with no middlemen.

Talk to an engineer