24/7 emergencies 814 777 6921812 230 6079WhatsApp 811 786 0768
Electrónica MonterreyElectrónica MonterreyLaboratorios Creativeit Talk to an engineer
Menu

How is a deep ground electrode installed?

A deep electrode is installed by drilling a borehole down to layers of lower resistivity, placing the electrode and backfilling so that it is in intimate contact with the soil and remains accessible for inspection.

A deep electrode is a solution for sites where the surface layer is highly resistive, where space to extend a grid is limited, or where a resistance more stable across the seasons is sought. The idea is to reach damper or more conductive layers with the electrode.

When it makes sense

The decision must be based on a resistivity profile with depth. If the deep layers are no more conductive than the surface layers, adding depth does not help much; in that case it is better to spread electrodes out or enlarge the area. With a favorable profile, a long vertical electrode makes better use of the soil than several short rods placed together.

Installation stages

  1. Preliminary review: locate buried utilities (pipes, cables) before drilling, and verify the expected soil profile.
  2. Drilling: open the borehole to the planned diameter and depth, taking care that it does not collapse.
  3. Placement: insert the electrode, which can be a rod coupled in sections or a cable, with joints that do not weaken.
  4. Backfill: fill the space between the electrode and the walls with a material that ensures continuous contact, without gaps, and that retains moisture.
  5. Connection and access: join the electrode to the system with corrosion-appropriate connections and install an inspection well that allows inspection and measurement.

Quality criteria

  • Joints between sections with mechanical and electrical continuity.
  • Backfill without voids, because a gap reduces actual contact.
  • Material compatibility between the electrode and the rest of the system, to avoid galvanic corrosion.

Verification

The resistance of the electrode and its contribution to the system are measured, and the date and soil conditions are recorded for future reference. The current electrical code and drilling safety regulations must be met; work near energized installations is performed by qualified personnel.

We do real tests, on video! Watch them on our YouTube channel →

Do you have a problem nobody has been able to measure?

Talk directly to the engineer in charge, with no middlemen.

Talk to an engineer