24/7 emergencies 814 777 6921812 230 6079WhatsApp 811 786 0768
Electrónica MonterreyElectrónica MonterreyLaboratorios Creativeit Talk to an engineer
Menu

How is a fault diagnosed by combining vibration and temperature?

The two variables are combined because they measure different consequences of the same defect: vibration reveals abnormal dynamic forces and temperature reveals energy dissipated as heat, and only together do they distinguish between similar causes.

Why a single variable is not enough

Vibration responds quickly to mechanical changes: looseness, misalignment, unbalance or an incipient defect on a bearing race. Temperature responds slowly, because it depends on thermal mass, ventilation and load. A bearing with an early defect can show rising vibration with temperature still normal; one lacking lubricant usually shows a temperature rise long before the spectrum clearly changes.

What each technique adds

  • Vibration: indicates which component and at what fault frequency the problem is located (spectrum, waveform, envelope).
  • Temperature: with a thermal imaging camera or a contact thermometer, it indicates where abnormal energy is being dissipated, through friction, electrical resistance or poor thermal contact.

How they are cross-checked in practice

The method is a table of combinations, not a single recipe:

  • High vibration and normal temperature: usually points to a mechanical cause without excessive friction, such as unbalance, looseness or resonance.
  • Low vibration and high temperature: suggests lubrication problems, excess grease, blocked ventilation, or an electrical or load-related cause.
  • Both high: the defect is already generating friction and forces; this is the most urgent scenario in a bearing.
  • Both normal, with noise or process stoppage: the problem may be intermittent or in another component.

What the engineer sees

Comparison is always made against a baseline of the same machine, with comparable load and speed. The trend is reviewed, not a single data point, and ambient temperature and load are recorded because both affect it. A difference between two equivalent points on the same machine, or between twin machines, is usually more informative than the absolute value.

When it is not enough

Surface emissivity, reflections and distance affect the thermographic reading; a shiny casing can appear colder than it is. Vibration measured far from the support point or with poor mounting is also misleading. For this reason the diagnosis is confirmed with a second technique, such as oil analysis or inspection, before working on the machine.

We do real tests, on video! Watch them on our YouTube channel →

Do you have a problem nobody has been able to measure?

Talk directly to the engineer in charge, with no middlemen.

Talk to an engineer