24/7 emergencies 814 777 6921812 230 6079WhatsApp 811 786 0768
Electrónica MonterreyElectrónica MonterreyLaboratorios Creativeit Talk to an engineer
Menu

How are non-electrical personnel trained in basic risks?

Non-electrical personnel are not taught to work on installations but to recognize the hazard, stay away from it and report it: what electricity does to the body, which signs indicate risk and which tasks are never theirs to do.

The goal is not for them to do the work, but to avoid exposure

Production, cleaning, warehouse and general maintenance personnel work around panels, extension cords, motors and portable tools. The training aims to ensure they identify the hazard, know they are not authorized to intervene and react well if something goes wrong. It is awareness and limits training, different from the training of those who operate electrical installations.

Content that does make sense

  • How electricity causes harm. Current passing through the body, internal and external burns, and the effect of an electric arc. It is explained that the hazard depends not only on voltage but also on the path and the time.
  • What seems harmless but is not. Damaged cables, overloaded extension cords, outlets with signs of overheating, wet equipment, tools with a broken ground pin.
  • Signs and barriers. What signs, tapes, padlocks and tags mean. Someone else’s padlock is never removed.
  • Limits of action. Do not open panels, do not reset tripped breakers without authorization, do not repair equipment, do not use water near energized parts.
  • Reporting. Whom to notify and how to describe what was observed: location, equipment, symptom.

What to do in an accident

The most valuable lesson is the response sequence. If a person remains in contact with an energized conductor, the rescuer must not touch them while there is any chance they are still energized: first try to cut the power and call for help; separate the person, using suitable means, only once it has been confirmed there is no risk to the rescuer. Then get medical attention, because internal effects may not be visible right away.

How to make it effective

  1. Use the workplace’s actual panels and equipment, not just generic slides.
  2. Adapt the content to each group’s tasks.
  3. Check understanding with practical questions, for example: what would you do if you found a bare cable?
  4. Repeat periodically and whenever equipment or processes change.

When it is not enough

If a person needs to work on energized installations or equipment, basic awareness is not enough: specific training and formal authorization are required. All electrical work must be done by qualified personnel, following the applicable safety regulations.

We do real tests, on video! Watch them on our YouTube channel →

Do you have a problem nobody has been able to measure?

Talk directly to the engineer in charge, with no middlemen.

Talk to an engineer