24/7 emergencies 814 777 6921812 230 6079WhatsApp 811 786 0768
Electrónica MonterreyElectrónica MonterreyLaboratorios Creativeit Talk to an engineer
Menu

Chamber test or field test?

It depends on the question you want to answer: an environmental chamber isolates and repeats a controlled condition, while a field test shows how the equipment behaves with all the real conditions combined.

What each one offers

In a chamber, a condition such as temperature, humidity or thermal cycling is set and kept under control. The results are comparable between samples and between dates. In the field, the equipment receives the real combination of temperature, vibration, dust, humidity, power quality and human handling, but nothing is controlled or repeated exactly.

Aspect Chamber Field
Control of variables High Low
Repeatability High Low
Realism Limited to what is reproduced High
Accelerated aging Possible Normally not
Identifying the cause of a failure Simpler More difficult

When the chamber is better

  • You want to verify compliance with a requirement or a defined test standard.
  • You need to compare two designs, materials or lots under equal conditions.
  • You want to provoke a failure in a short time to understand its mechanism.
  • The product is still in development and no real environment is available.

When the field is better

  • You suspect an interaction between several factors that the chamber does not reproduce.
  • You want to validate performance in the real installation, with its cables, shade, dust and operators.
  • The problem has already appeared in service and its cause needs to be found.

An example

An electronic cabinet passes the thermal test in the chamber but fails in a plant. In the field it turns out that direct sun on the housing, plus ventilation obstructed by dust, raised the internal temperature more than assumed. The chamber was not wrong: it tested the condition it was asked to test, and the real condition was a different one.

The combination usually wins

A good plan uses the field to discover which conditions matter, and the chamber to reproduce and quantify them in a controlled way. The field then confirms the findings.

Common errors

  • Accepting a chamber test as valid without checking that its conditions represent actual use.
  • Extrapolating an accelerated test to service life without a model to support it.
  • Running field tests without instrumenting the conditions, which prevents interpretation of the results.
  • Treating a single sample as representative of the lot.
We do real tests, on video! Watch them on our YouTube channel →

Do you have a problem nobody has been able to measure?

Talk directly to the engineer in charge, with no middlemen.

Talk to an engineer