24/7 emergencies 814 777 6921812 230 6079WhatsApp 811 786 0768
Electrónica MonterreyElectrónica MonterreyLaboratorios Creativeit Talk to an engineer
Menu

What is depth of discharge?

Depth of discharge is the fraction of a battery's capacity that has been drawn from full charge; it is the complement of state of charge and largely determines wear per cycle.

Definition

Depth of discharge, or DoD, indicates how much of the battery’s capacity has been used. If a battery starts from full charge and half of its capacity is drawn, the depth of discharge is 50%. It is the complement of state of charge: if the state of charge is 70%, the depth of discharge relative to full charge is 30%.

Two uses of the term

They are worth distinguishing because they get confused. It can refer to the depth at an instant, measured from full charge, or to the depth of a cycle, that is, how much is discharged between a starting point and an end point. A cycle running from 80% to 60% state of charge has a depth of discharge of 20%, even though a low level is never reached at any point.

Why it affects service life

Lithium cells wear more with deep cycles than with shallow ones. A deep cycle subjects the electrodes to larger volume changes and spends more time at voltage extremes, where side reactions are more intense. That is why cycle life is usually given together with a reference depth of discharge, and several shallow cycles are not equivalent to one deep cycle.

Usable window

A manufacturer of vehicles or storage systems does not usually allow the entire physical capacity to be used. It reserves margins at the extremes, so that the rated capacity is the total and the usable capacity is smaller. In that case, a depth of discharge of one hundred percent for the user does not correspond to one hundred percent of the cell.

How to read a specification

  • Check whether the depth of discharge refers to the rated capacity or the usable capacity.
  • See at what C-rate and temperature the cycle life was obtained.
  • Do not confuse it with state of health, which measures aging, or with state of charge, which measures the current level.
We do real tests, on video! Watch them on our YouTube channel →

Do you have a problem nobody has been able to measure?

Talk directly to the engineer in charge, with no middlemen.

Talk to an engineer