24/7 emergencies 814 777 6921812 230 6079WhatsApp 811 786 0768
Electrónica MonterreyElectrónica MonterreyLaboratorios Creativeit Talk to an engineer
Menu

What is the annual degradation of a module?

Annual degradation is the fraction of power a module loses each year of operation. It is usually expressed as a percentage per year and is used to project the long-term production of a system and to understand power warranties.

What it describes

Over time, a module delivers less power than its nameplate value. For planning purposes, that accumulated loss is spread out as an annual rate. It is not a universal value; it depends on the technology, the manufacturing quality and the environment in which the module operates.

Main causes

  • Initial degradation in the first hours or weeks of light exposure, characteristic of certain types of silicon.
  • Aging of encapsulants and sheets due to ultraviolet radiation, humidity and temperature, with loss of transparency.
  • Fatigue of solder joints and contacts from thermal cycling, which increases series resistance.
  • Microcracks that grow with cycling.
  • Phenomena such as potential-induced degradation, when system conditions favor it.

How it relates to the warranty

Manufacturers offer power warranties that describe a maximum expected loss over time. A warranty is a contractual commitment, not a prediction of actual behavior; most good-quality modules degrade less than the permitted amount. The details depend on each manufacturer and must be read in its document.

Why it is hard to verify

A loss of a few tenths of a percent per year is of the same order as the uncertainty of a field measurement. For that reason, detecting it requires I-V measurements properly referred to standard conditions, with calibrated irradiance sensors, or long series of monitoring data that reveal trends. A single measurement point is rarely conclusive.

How to interpret a trend

Degradation greater than expected makes it necessary to look for the cause through inspection, thermography, electroluminescence and I-V curves. A uniform drop suggests general aging; a drop concentrated in certain modules or strings suggests isolated faults, and the treatment is different.

We do real tests, on video! Watch them on our YouTube channel →

Do you have a problem nobody has been able to measure?

Talk directly to the engineer in charge, with no middlemen.

Talk to an engineer