24/7 emergencies 814 777 6921812 230 6079WhatsApp 811 786 0768
Electrónica MonterreyElectrónica MonterreyLaboratorios Creativeit Talk to an engineer
Menu

How is a module cleaned without damaging it?

A module is cleaned without damage by using low-hardness or demineralized water, soft tools and times of low irradiance, avoiding abrasives, harsh chemicals, thermal shock and excessive pressure, and following the manufacturer's instructions.

What the goal is

Soiling reduces the light reaching the cells and, if uneven, creates mismatch and hot spots. Cleaning recovers production, but the glass and its anti-reflective coating are delicate: poor cleaning can scratch the glass or degrade the coating and cause more loss than the one it was meant to correct.

Principles of cleaning that is safe for the module

  • Suitable water: water with a high mineral content leaves deposits as it dries. Soft or demineralized water reduces marks.
  • Soft tools: soft-bristle brushes, sponges or non-scratching cloths. No steel wool, scrapers or abrasives.
  • Moderate pressure: a very strong jet can force water into seals, frames or connectors, and damage seals.
  • No harsh chemicals: solvents and acidic or alkaline products can damage the coating, the seals or the frame. If a detergent is needed, it should be mild and compatible according to the manufacturer.
  • Time of day: with the module cool, early in the day or at dusk. Cold water on hot glass causes thermal shock, and the residue dries quickly and leaves marks.

When cleaning is worthwhile

There is no universal schedule. It depends on dust, rainfall, proximity to industry or farmland, and the tilt angle, which helps runoff. A reasonable way to decide is to compare the output of clean and soiled modules or to track the performance ratio: if the loss from soiling exceeds the cost of cleaning, it is worth doing.

Special precautions

  • Do not step on modules: microcracks in cells are not visible and reduce production over time.
  • Take care with persistent stains such as bird droppings: a concentrated spot creates localized shading and heats the cell.
  • Check the manufacturer’s conditions that may affect the warranty.

Electrical safety

Modules produce voltage as long as they receive light, and water on damaged connectors or cables increases the risk. Cleaning must be done by trained personnel, avoiding wetting connections and following the applicable safety regulations; on roofs, work-at-height measures also apply.

We do real tests, on video! Watch them on our YouTube channel →

Do you have a problem nobody has been able to measure?

Talk directly to the engineer in charge, with no middlemen.

Talk to an engineer