Why a maximum exists
In a module, current is almost constant at low voltage and drops quickly near the open-circuit voltage. Power is the product of the two. At zero voltage, power is zero because there is no voltage; at zero current it is zero as well. Between these two extremes lies a point where the product is highest. That is the maximum power point, and it sits at the knee of the I-V curve.
Why it moves
The position of the point is not fixed. With more irradiance, current rises and the point moves upward. With higher temperature, voltage falls, the point moves to the left and power decreases. Shading and mismatch between modules can create several local maxima on a string curve, not just one.
How the inverter follows it
The load sets the operating point. If the inverter connected a fixed load, the module would operate far from the maximum most of the time. That is why inverters and optimizers include maximum power point tracking, known by its acronym MPPT. A common method is to slightly perturb the operating voltage, observe whether power rises or falls, and move in the direction that improves it. It is a continuous process that repeats all the time.
What an engineer sees in practice
- The inverter input voltage moves during the day as conditions change.
- Under partial shade, some algorithms settle on a lower-power local maximum and output drops more than expected.
- With unequal strings on the same inverter input, tracking cannot optimize all of them at once.
An example
When a cloud passes, current falls and the MPP shifts; the algorithm readjusts the voltage within seconds or less. If the algorithm is slow, energy is lost during rapid changes in irradiance. Tracking efficiency is one of the characteristics of the inverter.
The maximum power point should not be confused with the module’s rated power, which is defined at standard test conditions. Electrical work on a solar array must be carried out by qualified personnel in accordance with current regulations.