General scope
IEC 60296 defines the characteristics of new mineral insulating oils, that is, as delivered before use. It applies to oils intended for transformers and for switchgear and similar electrical equipment that require an insulating and cooling liquid. It is not the criterion for deciding whether an in-service oil is still usable: separate maintenance guides exist for that.
What it contains
- Oil classification, for example by antioxidant additive content and by low-temperature behavior.
- Property requirements, grouped by function: physical and flow properties, electrical properties, oxidation stability and chemical compounds, and health, safety, and environmental aspects.
- Test methods referenced for each property.
- Provisions on sampling, delivery, and marking.
What an engineer sees in practice
When new oil is received, the supplier’s certificate is checked against the requirements of the standard and of the contract specification. If verification is required, a sample is taken on receipt and analyzed before filling the equipment. Attention must be paid to whether it is the same type and class ordered and, for a top-up, whether the oil is compatible with the existing oil.
How to use it well
- Consult the current edition and its amendments, because the requirements are revised over time.
- Identify the category and the additives with which the oil was ordered.
- Do not use its limits to evaluate in-service oil.
When it does not apply
It does not cover fluids other than mineral oil, such as esters or silicones, or used oils. This guide describes only the general scope; for requirements, limits, and methods, the current text of the standard must be consulted.