24/7 emergencies 814 777 6921812 230 6079WhatsApp 811 786 0768
Electrónica MonterreyElectrónica MonterreyLaboratorios Creativeit Talk to an engineer
Menu

Inhibited or uninhibited oil?

An inhibited oil contains an antioxidant that delays its oxidation and extends its service life, whereas an uninhibited oil oxidizes sooner; the choice depends on the type of transformer and on whether the inhibitor can be monitored and replenished.

Essential difference

All mineral insulating oil contains, to a greater or lesser extent, natural compounds that slow oxidation. Inhibited oil also has an antioxidant additive, while uninhibited oil depends only on those natural compounds. There are also oils with a small amount of inhibitor, considered an intermediate category.

Advantages of inhibited oil

  • Longer induction period: it takes longer to produce acids and sludge.
  • Better performance in equipment that runs hot, with plenty of oxygen available, or with copper present.
  • The possibility of replenishing the additive and extending service life.

The costs of that advantage

The inhibitor is consumed, and its depletion is not always noticeable in basic tests. Its concentration must be measured and replenishment planned. In a transformer without that follow-up, the protection disappears without warning and deterioration sets in quickly.

When one or the other is preferred

Inhibited oil is common in free-breathing equipment or equipment exposed to air, and in demanding service. Uninhibited oil can be reasonable in sealed equipment with little exposure to oxygen, or where maintenance practice and design provide for it. The decision rests on the equipment manufacturer’s recommendations and the maintenance policy.

What an engineer sees in practice

Two transformers with the same load can age at different rates for this reason alone. An uninhibited oil shows rising acidity and falling interfacial tension sooner. An inhibited oil looks healthy until the inhibitor falls below a certain level.

What to check first

  1. What type of oil the equipment actually contains and what the manufacturer specified.
  2. Whether the inhibitor is being tracked.
  3. How oils were mixed in previous top-ups; mixing different types without analysis can produce an oil of uncertain behavior.
We do real tests, on video! Watch them on our YouTube channel →

Do you have a problem nobody has been able to measure?

Talk directly to the engineer in charge, with no middlemen.

Talk to an engineer