What it means
An insulator has good dimensional stability when its dimensions change little under service conditions. It is not a single property: it brings together several phenomena that change the dimensions of a part and that are evaluated separately.
What alters it
- Thermal expansion: the material expands when heated according to its expansion coefficient, which can differ from that of the metals it works with.
- Moisture absorption: many polar polymers, cellulose and fiber laminates swell when they absorb water and shrink when they dry.
- Creep and stress relaxation: under sustained load the material slowly deforms over time, more so at elevated temperature.
- Curing or cooling shrinkage and the release of residual stresses from manufacturing.
- Aging and loss of volatiles or plasticizers.
Why it matters electrically
Clearances and creepage distances are designed with a tolerance. If a spacer shrinks, a support warps or a winding loses clamping pressure, those distances and the retention change. In windings with cellulose insulation, shrinkage on drying reduces the mechanical clamping, which is relevant for withstanding short-circuit forces. In connectors and housings, a dimensional change produces play, poor contact or stresses at joints with metal.
What an engineer sees in practice
Parts that fit in the shop but not at the installation, cracks near metal inserts, deformation after heat cycles, or loosening of bolts in insulating parts.
How it is evaluated
The part is measured before and after conditioning at defined temperature and humidity, or the expansion coefficient and water absorption are determined. It is advisable to request these data in the relevant direction, because anisotropic materials change differently depending on the axis.
What to check first
Identify which mechanism dominates in your application: temperature, moisture or sustained load. That defines which test makes sense and which material is suitable.