24/7 emergencies 814 777 6921812 230 6079WhatsApp 811 786 0768
Electrónica MonterreyElectrónica MonterreyLaboratorios Creativeit Talk to an engineer
Menu

What Is an Insulator and What Is a Conductor?

An insulator is a material with almost no free charges that can move under an electric field, so it conducts very little current; a conductor has mobile charges in abundance and conducts easily.

Direct definition

The fundamental difference is the availability of charges that can move. In a conductor, such as a metal, there are large numbers of free electrons and a small voltage produces an appreciable current. In an insulator, the electrons are bound to atoms or bonds, and the electric field cannot move them easily, so the current is minimal.

Explanation with energy bands

In solids, electrons occupy energy bands. In a metal, the highest occupied band is partially filled, and electrons can change state with very little energy. In an insulator, a filled band is separated from the next empty band by a large energy gap, and electrons cannot cross it with the thermal energy available at room temperature. Semiconductors have a smaller gap, so their conduction can be controlled with impurities and temperature.

How it is quantified

  • Resistivity: an intrinsic property of the material, in ohm-meters. It is very low in a conductor and very high in an insulator, with many orders of magnitude between the two.
  • Dielectric strength: the maximum field an insulator withstands before puncturing. Beyond that limit, the insulator fails and conducts.
  • Permittivity: in an insulator, it describes how the material polarizes, without free charges flowing.

The boundary is not absolute

  • No real insulator is perfect: there is always a small leakage current.
  • The resistivity of an insulator falls with temperature and with moisture.
  • The surface of a contaminated insulator can conduct.
  • At a sufficiently high voltage, breakdown occurs.
  • The same material can act as an insulator or a conductor depending on frequency and context: at radio frequency, a lossy dielectric absorbs energy.

What the engineer sees

In practice, an insulator is assessed by its resistivity, dielectric strength, losses and environmental behavior; a conductor by its conductivity, current-carrying capacity and thermal and mechanical behavior. Understanding this boundary avoids treating a material as ideal.

We do real tests, on video! Watch them on our YouTube channel →

Do you have a problem nobody has been able to measure?

Talk directly to the engineer in charge, with no middlemen.

Talk to an engineer