24/7 emergencies 814 777 6921812 230 6079WhatsApp 811 786 0768
Electrónica MonterreyElectrónica MonterreyLaboratorios Creativeit Talk to an engineer
Menu

What salt spray testing is and what it evaluates

Salt spray is an accelerated corrosion test that exposes a sample to an aerosol of saline solution in a controlled chamber, in order to compare the resistance of coatings and materials to a corrosive environment.

What it consists of

A chamber generates a fine aerosol of sodium chloride solution and keeps the temperature stable. The sample remains in that atmosphere for a defined time and is then inspected for signs of corrosion: rust, blisters, loss of adhesion or creep from a scribe.

What it evaluates

  • The effectiveness of protective coatings such as paint, galvanizing, anodizing or nickel plating.
  • The quality of the coating application process, since defects such as pores or insufficient thickness are revealed.
  • Comparison between materials or processes under the same conditions.

Why it is used

It is repeatable and relatively simple. Chloride is highly corrosive to many metals, and continuous exposure to saline moisture accelerates the attack. It works as a quality control and as a filter to rule out weak options.

What it is not

A pass time in salt spray does not translate directly into years of field life. Real corrosion depends on wet and dry cycles, contaminants, ultraviolet radiation and temperature, which the continuous test does not reproduce. In addition, some coatings perform better or worse in salt spray than in service. That is why the test serves to compare and to verify conformity, not to predict exact life.

What the engineer sees

The evaluation usually records the time to the appearance of red rust, the degree of blistering and the corrosion creep from a scribe. The conclusion rests on criteria in the product specification, and the result depends on surface preparation, sample position, and control of the solution and the chamber.

A complementary alternative

Cyclic tests combine salt spray, drying and humidity and usually correlate better with atmospheric corrosion. The specific parameters depend on the applicable standard and the product specification.

We do real tests, on video! Watch them on our YouTube channel →

Do you have a problem nobody has been able to measure?

Talk directly to the engineer in charge, with no middlemen.

Talk to an engineer