24/7 emergencies 814 777 6921812 230 6079WhatsApp 811 786 0768
Electrónica MonterreyElectrónica MonterreyLaboratorios Creativeit Talk to an engineer
Menu

What the IEC 60584 thermocouple standard covers

For letter-designated thermocouples (K, J, T, E, N, R, S, B), IEC 60584 sets out the electromotive force versus temperature functions and tables, along with the tolerance classes.

Short answer

IEC 60584 covers the standardization of thermocouples: for each letter-designated type it defines how much voltage the thermocouple must generate at each temperature, relative to a reference junction, and how far a real thermocouple may deviate from that relationship.

Why it is needed

A thermocouple produces a small voltage through the Seebeck effect, which depends on the temperature difference between the measuring junction and the reference junction. For thermocouples from different manufacturers and a given readout instrument to be compatible, the relationship between that voltage and temperature has to be fixed. The standard does this through reference functions and tables for each type.

General content

  • Reference functions and tables relating electromotive force and temperature for each type.
  • Tolerance classes limiting how far a new thermocouple may deviate from those tables.
  • Identification of the types by letter, and their alloy composition.

Tolerances depend on the current edition and on the type, so they should be looked up in the document rather than quoted from memory.

What the standard does not resolve

The table describes an ideal thermocouple. In practice, the actual error depends on the homogeneity of the wire, which changes with use at high temperature, on the gradient along the cable, on the reference junction compensation and on the extension cable. Two thermocouples of the same type that both meet the class can differ from each other in the process.

What an engineer sees

The readout instrument applies the function from the standard to convert millivolts to temperature. If the wrong type is configured, the reading comes out with a large, systematic error. If an extension cable or connector of another type is used, a parasitic junction appears and alters the signal.

How to use it

Select the type according to range, atmosphere and stability, confirm the required class in the current edition, and verify that the readout, cable and connectors all match the same type. Calibration remains the way to find out the error of an installed thermocouple.

We do real tests, on video! Watch them on our YouTube channel →

Do you have a problem nobody has been able to measure?

Talk directly to the engineer in charge, with no middlemen.

Talk to an engineer