24/7 emergencies 814 777 6921812 230 6079WhatsApp 811 786 0768
Electrónica MonterreyElectrónica MonterreyLaboratorios Creativeit Talk to an engineer
Menu

What are absolute, gauge and differential pressure?

The three differ in the reference they are measured against: absolute pressure is measured against a perfect vacuum, gauge pressure against local atmospheric pressure and differential pressure between any two process pressures.

The essentials: each has its own reference

Pressure is force per unit area, but a pressure figure only makes sense if you know what it is measured against. Hence the three types.

Absolute pressure

It is measured relative to total vacuum, which is the physical zero of pressure. It cannot be negative. It is the pressure that enters into the gas laws and thermodynamic properties, such as the boiling point of a liquid.

Gauge pressure

It is measured relative to the local atmospheric pressure. It is what an ordinary pressure gauge shows with its connection open to the air: zero when the system is open to the atmosphere. It can be negative if the system is below atmospheric pressure; this is then called partial vacuum.

Differential pressure

It is the difference between two pressures, one connected to each port of the sensor. The absolute level of the two does not matter, only their difference. It is used to measure the drop across filters, flow with an orifice plate or level in closed tanks.

How they relate

Absolute pressure is the sum of gauge pressure and atmospheric pressure. Atmospheric pressure is not constant: it varies with altitude and weather. Therefore, the same absolute pressure translates into different gauge readings in different places or on different days.

Type Reference Typical use
Absolute Perfect vacuum Vacuum, barometry, gas processes
Gauge Local atmosphere Lines, tanks, pneumatics, hydraulics
Differential Another process pressure Filters, flow, level

What the engineer sees

A gauge sensor vented to the atmosphere follows weather variations, which at low ranges can appear as zero drift. An absolute sensor shows a nonzero value at atmosphere, which is to be expected: it is indicating atmospheric pressure. Confusing the types when specifying or calibrating produces errors equal in magnitude to atmospheric pressure.

How to interpret the result

Before reading or comparing any figure, ask: gauge, absolute or differential? And, if differential, what is the line pressure common to both ports?

We do real tests, on video! Watch them on our YouTube channel →

Do you have a problem nobody has been able to measure?

Talk directly to the engineer in charge, with no middlemen.

Talk to an engineer