24/7 emergencies 814 777 6921812 230 6079WhatsApp 811 786 0768
Electrónica MonterreyElectrónica MonterreyLaboratorios Creativeit Talk to an engineer
Menu

What is a sampling oscilloscope?

A sampling oscilloscope reconstructs very fast repetitive signals by taking a sample at a different point on each repetition, using the equivalent-time sampling method, which is why it reaches bandwidths a real-time oscilloscope cannot.

The central idea

A real-time oscilloscope takes many consecutive samples in a single capture. For extremely fast signals, neither the converter nor the input chain can manage this. The sampling oscilloscope changes the approach: if the signal repeats identically in each period, it is enough to take a single sample per repetition, shifting the sampling instant little by little relative to the trigger. As many repetitions accumulate, the samples are placed in their relative positions and reconstruct a waveform that appears to have been captured with a much higher time resolution. This method is called equivalent-time sampling.

What makes it so fast

The bandwidth is set by the input sample-and-hold circuit, which only has to follow the signal for a very brief instant. The rest of the chain, which processes the samples, can work at a much lower speed. That is why it is used to characterize very high-speed communication signals, transmission lines with reflectometry, and microwave components.

Requirements and limitations

  • Repetitive, stable signal: reconstruction assumes every repetition is the same. A non-repetitive signal or one with variations is reconstructed poorly.
  • Trigger: an accessible trigger signal, a reference clock or a good-quality internal trigger is needed, because sampling is referenced to the trigger instant.
  • It does not capture single events: a fault that occurs only once is lost.
  • Acquisition time: gathering a complete waveform takes many repetitions, which is why it is slower to update.
  • Trigger jitter: timing disorder between trigger and signal adds to the reconstructed waveform and limits the accuracy of time measurements.

An example

To see the eye diagram of a fast serial signal, a sampling oscilloscope takes samples across millions of bits and overlays them. The number of bits observed gives a very complete statistical picture of jitter and noise. A real-time oscilloscope can also produce eye diagrams if its bandwidth is high enough, but it does not always manage this with signals that are too fast.

We do real tests, on video! Watch them on our YouTube channel →

Do you have a problem nobody has been able to measure?

Talk directly to the engineer in charge, with no middlemen.

Talk to an engineer