24/7 emergencies 814 777 6921812 230 6079WhatsApp 811 786 0768
Electrónica MonterreyElectrónica MonterreyLaboratorios Creativeit Talk to an engineer
Menu

Video: How to Separate Two Close-Frequency Signals on an Oscilloscope

Video and theory review on frequency, wavelength and measuring the phase shift between signals on an oscilloscope.

Oscilloscope showing two close-frequency signals

Video

https://www.youtube.com/watch?v=gvWdIlaBkJ0

What frequency is

Frequency is a quantity that measures the number of repetitions per unit of time of any periodic phenomenon or event.

To calculate it, count the occurrences of the event in a time interval and divide by the elapsed time. In the International System (SI), frequency is measured in hertz (Hz), in honor of Heinrich Rudolf Hertz. One hertz is an event repeated once per second; a two-hertz phenomenon repeats twice per second. This unit was originally called the cycle per second (cps).

Other units are revolutions per minute (rpm). Heart rate and musical tempo are measured in beats per minute (bpm).

Wave frequency

Frequency is inversely related to wavelength: the higher the frequency, the shorter the wavelength, and vice versa. The frequency f is equal to the wave velocity v divided by the wavelength λ (lambda).

Measuring the phase shift between two signals of the same frequency

We start from two sinusoidal signals of the same frequency. The phase shift is the phase difference between the two waves.

The phase shift between two signals of the same frequency can be measured in two ways:

  1. From the dual display of both signals. The two functions go to zero at instants t1 and t2, respectively.
  2. Using Lissajous figures. They can be observed on the oscilloscope screen in x-y mode (by pressing key 5): the channel I signal is shown on the vertical axis and the channel II signal on the horizontal axis.
We do real tests, on video! Watch them on our YouTube channel →

Do you have a problem nobody has been able to measure?

Talk directly to the engineer in charge, with no middlemen.

Talk to an engineer