24/7 emergencies 814 777 6921812 230 6079WhatsApp 811 786 0768
Electrónica MonterreyElectrónica MonterreyLaboratorios Creativeit Talk to an engineer
Menu

4263B LCR meter, 100 Hz to 100 kHz, in Monterrey

Hewlett-Packard HP 4263B LCR meter for evaluating components on the production line and for bench impedance testing.

HP 4263B LCR meter, 100 Hz to 100 kHz

Test frequencies

The HP 4263B is a low-end LCR meter from Hewlett-Packard. It is used to evaluate components on the production line and for fundamental impedance testing on the bench.

It has five test frequencies to simulate the correct conditions: 100 Hz, 120 Hz, 1 kHz, 10 kHz and 100 kHz. A 20 kHz frequency can be added as an option.

Speed and production

Measurement speed is 25 ms at any test frequency. This improves throughput when testing electrolytic capacitors and transformers.

The 4263B verifies the contact condition between the test terminals and the device under test (DUT). This makes PASS/FAIL testing with automatic handlers in production reliable.

Its fast recovery system resumes normal operation as soon as a defective device is removed from the handler. The handler can always run at its maximum speed.

Electrolytic capacitors

The accuracy and wide measurement range of the 4263B make it suitable for measuring electrolytic capacitors. A charged capacitor can discharge through the front panel and destroy an instrument. The front panel of the 4263B is designed to protect it and maintain test integrity.

Other measurements

The 4263B measures turns ratio (N), mutual inductance (M) and DC resistance (DCR), so data calculations and changing test setups take less time. The signal level is configurable and it has a voltage and current monitor function, which makes it easier to use with level-dependent DUTs such as cored inductors.

We do real tests, on video! Watch them on our YouTube channel →

Do you have a problem nobody has been able to measure?

Talk directly to the engineer in charge, with no middlemen.

Talk to an engineer