24/7 emergencies 814 777 6921812 230 6079WhatsApp 811 786 0768
Electrónica MonterreyElectrónica MonterreyLaboratorios Creativeit Talk to an engineer
Menu

Keysight 85050C Rental: 7 mm VNA Mechanical Calibration Kit, DC to 18 GHz

Precision mechanical calibration kit for vector network analyzers with a 7 mm interface. It is for RF and microwave laboratories and engineers who need to calibrate a VNA without buying the kit.

Keysight 85050 precision mechanical calibration kit rental, 18 GHz, 7 mm

Keysight 85050C calibration kit rental in Monterrey, Nuevo León

At Creativeit we rent the Keysight 85050C Precision Mechanical Calibration Kit. It is a high-precision mechanical calibration kit for characterizing and correcting systematic errors in vector network analyzers (VNAs) with a 7 mm coaxial interface. It is specified from DC to 18 GHz and incorporates precision standards for two-port calibrations, plus a 50 Ω precision airline for TRL (Thru-Reflect-Line) calibration. It also includes mechanical accessories for maintaining the integrity of the measurement interface: adapters, connector gauges and torque wrenches.

What the Keysight 85050C is

The Keysight 85050C is a precision mechanical calibration kit for RF and microwave measurement systems with 7 mm / APC-7 connectors. It presents known standards to the network analyzer so it can determine and correct the systematic errors of the measurement chain.

In an S-parameter measurement, the VNA result does not depend only on the device under test. Directivity, source and load match, reflection and transmission tracking, and other test system errors also come into play. Calibration characterizes those errors before the device is connected and establishes a reference plane closer to the DUT.

Calibrating 7 mm network analyzers

The 85050C is designed for 7 mm interfaces, so it must be used with a VNA and accessories compatible with that interface. Keysight classifies it as a 7 mm Precision Mechanical Calibration Kit, with a range of DC to 18 GHz.

It is useful when a reproducible mechanical calibration is required for measurements of:

  • S11, S21, S12 and S22
  • Return Loss and Insertion Loss
  • Impedance
  • Reflection coefficient
  • S-parameters
  • Characterization of RF components and passive devices
  • Verification of measurement systems

Standards included in the kit

The 85050C configuration includes a short, collet-style short, open, fixed broadband load, precision airline, coax termination and TRL adapter. These allow different calibration methods, depending on the architecture of the measurement system and the required procedure.

Short

The short circuit provides a known reflection reference and is used to characterize the behavior of the test port.

Open

The open standard provides another known reflection condition and allows the VNA to determine part of the systematic measurement errors.

Load

The load provides a known termination and is used to characterize the match of the measurement system.

Precision Airline

One of the key components of the 85050C is its 50 Ω precision airline, for calibrations with the TRL method. Keysight specifies it for the range of 2 to 18 GHz, with a return loss of at least 60 dB based on mechanical measurements.

TRL calibration with a 50 Ω airline

The TRL (Thru-Reflect-Line) method is a calibration technique widely used in RF and microwave work. Unlike methods based on Open, Short and Load, TRL uses a Thru connection, a known reflection and a transmission line of known length. The 85050C airline is the controlled transmission reference for this procedure.

TRL is useful when high accuracy is sought in RF components, networks and devices, especially when defining conventional standards is less convenient.

Why calibrate a VNA

A network analyzer measures very accurately, but final accuracy depends on the whole system. The following can affect the result:

  • Connectors, test cables and adapters
  • Impedance mismatches
  • Transmission losses and reflections
  • Directivity
  • Transmission and reflection tracking
  • Mechanical variations
  • Temperature
  • Connection repeatability

That is why, before measuring an RF component, you must calibrate for the configuration in use. The Keysight 85050C provides the mechanical standards for characterizing systematic errors and improving accuracy.

Performance up to 18 GHz

Keysight defines electrical specifications for the standards. The broadband load has return loss ≥38 dB from DC to 18 GHz, and the precision airline has return loss ≥60 dB between 2 and 18 GHz. The Open and Short standards have specified tolerances relative to their nominal models, with limits by frequency range, from DC up to 18 GHz.

It is a suitable tool wherever calibration quality directly affects the uncertainty of RF measurements.

Mechanical accessories for precision connections

The mechanical interface is also critical in a calibration. The Keysight 85050C includes accessories for achieving consistent connections and maintaining the integrity of the interface.

Torque wrenches

These apply the specified torque when connecting standards and accessories. Consistent torque improves repeatability and prevents excessive force from damaging the interface.

Connector gauges

Connector gauges verify and maintain the mechanical dimensions of the interface. At high frequencies, small mechanical variations can become significant electrical errors.

Adapters

These let you modify the test port configuration and change the gender of the interface when the measurement requires it.

Keysight 85050C applications

RF component characterization

It is used in the measurement system to characterize:

  • RF filters
  • Attenuators
  • Dividers
  • Couplers
  • Passive networks
  • Coaxial cables
  • Adapters
  • Matching networks
  • Microwave components

S-parameter measurements

A proper calibration allows you to measure S11, S21, S12 and S22, along with derived parameters such as insertion loss, return loss, impedance and reflection coefficient.

RF and microwave laboratories

It can be used in laboratories with precision measurements that require mechanical calibration with traceable standards.

Verification and maintenance of measurement systems

It also serves to check system performance after maintenance, cable changes, setup modifications or the installation of new accessories.

Compatibility with your measurement system

Before renting, confirm that the analyzer and accessories are compatible with the 7 mm/APC-7 interface and with the required calibration method.

The 85050C belongs to Keysight’s family of 7 mm mechanical calibration kits. According to Keysight, the 85050B also operates from DC to 18 GHz, but it is a standard mechanical configuration. The 85050C incorporates the precision airline for TRL. The difference matters (85050 family) if you need a higher-accuracy calibration or TRL specifically.

Keysight 85050C rental in Mexico

Renting is an alternative for laboratories, engineers, universities, manufacturers and companies that need a precision mechanical calibration without acquiring the kit. It is a good fit for:

  • RF and microwave projects
  • Temporary VNA calibration
  • Prototype development
  • Component characterization
  • Research and development
  • Measurement system verification
  • Engineering tests
  • Laboratory maintenance
  • Metrology projects
  • S-parameter measurement validation

What to tell us when requesting a rental

To determine the right configuration, please tell us:

  1. Network analyzer model.
  2. Test port interface type.
  3. Maximum frequency required.
  4. Type of calibration you need.
  5. Whether you need SOLT, TRL or another method.
  6. Type of cables and adapters used.
  7. Number of ports the measurement requires.

With that information we review the compatibility of the 85050C with your system before the rental.

Main specifications

Feature Keysight 85050C
Type Precision mechanical calibration kit
Interface 7 mm / APC-7
Impedance 50 Ω
Frequency DC to 18 GHz
Calibration Two-port
TRL method Yes
Airline Precision, 50 Ω
TRL airline 2 to 18 GHz
Standards Open, Short, Load and other precision accessories
Torque wrench Included
Connector gauges Included
Adapters Included
Application VNA calibration and characterization

The features and composition of the kit are based on official Keysight documentation.

RF and microwave equipment rental

At Creativeit we rent instrumentation and accessories for RF, microwave, metrology and electronic characterization projects. If you need the Keysight 85050C to calibrate a 7 mm network analyzer, talk to the engineer: we review compatibility with your VNA, cables, connectors and operating frequency. Request availability and a rental quote in Monterrey, Nuevo León and Mexico.

We do real tests, on video! Watch them on our YouTube channel →

Do you have a problem nobody has been able to measure?

Talk directly to the engineer in charge, with no middlemen.

Talk to an engineer