24/7 emergencies 814 777 6921812 230 6079WhatsApp 811 786 0768
Electrónica MonterreyElectrónica MonterreyLaboratorios Creativeit Talk to an engineer
Menu

Industrial calibration with photographic evidence in Monterrey

Calibration of pressure, temperature and process signals with photographs of each stage, in the field or in the laboratory, for those responsible for instrumentation and quality.

Industrial calibration with photographic evidence in Monterrey

Calibration of pressure, temperature and process signals

We are a company specializing in the calibration of pressure, temperature and process signals. We work with precision pneumatic pumps, master pressure gauges, reference sensors and the Fluke 754 documenting calibrator to obtain repeatable, traceable measurements.

We also have support equipment, test benches and specialized accessories for calibrating in the field and in the laboratory, with the same accuracy and traceability in any environment. We deliver verifiable, documented results, with photographs of each stage of the process.

Evidence: As Found and As Left

With each calibration we attach “As Found” images (initial condition of the equipment) and “As Left” images (final condition after adjustment). They show the actual state of the instrument before and after the work.

We record each calibration with real photographs of the procedure. When the customer requests it, we also include videos of the entire process, with the connections, adjustments, instruments and working conditions.

Our services

Pressure calibration

We calibrate pressure transmitters, electronic pressure gauges and indicators, and we perform leak and differential pressure tests. We take photographs of the instrument connected to the pump and the Fluke 754, with the applied pressure and the recorded reading.

Temperature calibration

We calibrate RTDs, thermocouples, and temperature transmitters and indicators. We include photographs of the wiring, the cables, the configuration and each calibration point.

Industrial signal calibration

We calibrate 4–20 mA and process voltage signals, and we perform loop checks and HART programming. We take photographs of the instrument display, the Fluke 754, and the signals generated and measured.

Field services

We calibrate without removing instruments, make HART adjustments on site, verify signals to PLC or SCADA, and carry out commissioning and inspections. We take photos of the instrument in operation, the connections, the piping, the manifold and the real conditions.

Photographic and video evidence

Each report includes photographs of the actual procedure, with the connection, the real values, the applied pressures and the adjustments. Videos of the entire process are optional.

We do real tests, on video! Watch them on our YouTube channel →

Do you have a problem nobody has been able to measure?

Talk directly to the engineer in charge, with no middlemen.

Talk to an engineer