Environmental testing to IEC 60068
IEC 60068 is the international reference standard for environmental testing of equipment, components and materials. It evaluates their behavior, performance and reliability under controlled, severe environmental conditions.
In the laboratory, it makes it possible to simulate real operating, storage and transport conditions, with repeatable, traceable results for design, certification and quality control.
What the IEC 60068 standard is
IEC 60068 (Environmental Testing) is a series of standards from the International Electrotechnical Commission (IEC) that defines:
- Test methods
- Controlled environmental conditions
- Exposure procedures
- Severity and duration criteria
It is applied in the electrical, electronics, industrial, automotive, aerospace and telecommunications sectors.
Tests covered
Temperature tests
- IEC 60068-2-1 – Test A: Cold
- IEC 60068-2-2 – Test B: Dry heat
- IEC 60068-2-14 – Test N: Change of temperature
They evaluate expansion, contraction, thermal fatigue and functional stability.
Humidity tests
- IEC 60068-2-30 – Damp heat, cyclic
- IEC 60068-2-78 – Damp heat, steady state
They are used to analyze corrosion, ion migration, dielectric failures and material degradation.
Combined temperature–humidity tests
- Simulation of tropical conditions and harsh environments
- Evaluation of seals, encapsulants and protective coatings
Typical test parameters
- Temperature: −40 °C to +150 °C (depending on the method)
- Relative humidity: up to 98% RH
- Duration: from hours to extended cycles
- Control: continuous and programmable
Laboratory equipment
The following are used to perform IEC 60068 tests:
- Laboratory climatic chambers
- Programmable temperature and humidity controllers
- Calibrated, traceable sensors
- Data logging systems
Sun Systems climatic chambers make it possible to meet IEC 60068 methods, with stable, uniform and repeatable test conditions.
Benefits
- Objective validation of product design
- Fewer field failures
- International regulatory compliance
- Improved reliability and service life
- Technical support for certifications
Common applications
- Electronic components
- PCBs
- Sensors and actuators
- Insulating and ESD materials
- Industrial and control equipment
Testing services
- Testing to IEC 60068
- Development of test profiles
- Execution in climatic chambers
- Detailed technical reports
For additional technical information, specific scopes or a test quotation, speak with the engineer.
Metrological temperature control
In our environmental analyses and tests where temperature is a critical parameter, we verify our thermal systems in-house. Each test is backed by temperature validation in our dry-well calibrator, which has these characteristics:
- Operating range: -30 °C to 150 °C.
- Resolution: 0.01 °C.
- Thermal stability: ±0.02 °C.
- Display accuracy: ±0.1 °C.
- Block uniformity: horizontal ≤ ±0.05 °C, plus controlled vertical gradient.
This is how we confirm the stability, uniformity and accuracy of the test conditions. The expanded uncertainty of the system is determined according to the operating point, the sensor under test and the process conditions.
