24/7 emergencies 814 777 6921812 230 6079WhatsApp 811 786 0768
Electrónica MonterreyElectrónica MonterreyLaboratorios Creativeit Talk to an engineer
Menu

Calibration and Certification of Dielectric Hot Sticks in Monterrey

We calibrate and test hot sticks and other dielectric equipment, in the field or in the laboratory, for those in charge of crews working on energized power lines.

Testing and calibration of dielectric hot sticks in Monterrey

What we calibrate

We perform calibrations in the field or in the laboratory on dielectric equipment: hot sticks, aerial buckets, sleeves, gloves, blankets and rope.

Work on energized power lines requires tools designed and manufactured specifically for high voltage, which have passed field tests and the tests specified by safety standards.

We are the only ones in the country able to include videos and photographic evidence in our reports, for greater customer assurance.

Why inspect hot sticks

With time and use, it is advisable to carry out routine inspections of the mechanical behavior of hot sticks, along with electrical tests, because the lives of the operators depend on them.

Mechanical check

Check that there are no cracks or deformations from the stresses of constant use.

Electrical condition

Electrical condition is not easy to diagnose. Even if the hot stick looks fine to the naked eye, moisture may have seeped in or there may be impurities or dirt on its surface, and that is a potential risk to users.

We perform tests dry and on a wet surface, as established in OSHA standards.

Portable test equipment

There is portable, easy-to-use equipment that makes it possible to test hot stick insulation without being in a specialized workshop or laboratory, as required by ASTM F711 and IEC 60855-1.

  • Metal frame, with fiberglass side covers.
  • Metal current-sensing electrode.
  • Wooden cover and handle for easy transport.
  • Hipot tests from 70kV wet up to 100kV dry.

Chance LT10A

We carry portable instruments such as the Chance LT10A. Its display has green and red areas to indicate the result for the item under test:

  • Green: OK, with leakage of less than 20 microamperes.
  • Red: not OK, with leakage greater than 20 microamperes.

It also includes a calibration hot stick, in case you want to verify the instrument’s reading.

Surface maintenance

If constant use leaves hot sticks with scratches, scrapes or surface defects, there are kits for making the necessary repairs, materials for keeping surfaces clean and glossy, and silicone-impregnated cloths. These prevent dirt and moisture from building up on hot sticks and putting operators at risk.

Laboratory experience

We have been doing laboratory testing for several decades, with a commitment to the lives and safety of operators on electrical transmission and distribution lines. You can find your equipment at Análisis Eléctricos Monterrey.

For more information about our equipment, you can call, send a WhatsApp message to 8117860768 or write to us by email.

Leakage current table per ASTM F711

Table 2 of ASTM F711-17 with bending forces and leakage current by type and diameter of tube and rod

We do real tests, on video! Watch them on our YouTube channel →

Do you have a problem nobody has been able to measure?

Talk directly to the engineer in charge, with no middlemen.

Talk to an engineer