24/7 emergencies 814 777 6921812 230 6079WhatsApp 811 786 0768
Electrónica MonterreyElectrónica MonterreyLaboratorios Creativeit Talk to an engineer
Menu

What does IEC 62740 set out on root cause analysis?

IEC 62740 is an international standard that describes root cause analysis: its phases, how to choose the right techniques and how to document and follow up on the conclusions.

General scope

IEC 62740 presents a framework for performing root cause analysis in the field of dependability and failure management. It does not impose a single technique: it describes a process and gives guidance on choosing tools according to the nature of the problem, its complexity and the information available.

What the standard gives guidance on

  • When a root cause analysis is advisable, depending on the severity or recurrence of the event.
  • The stages of the process: define the problem, gather data, identify causes, verify the conclusions and propose actions.
  • The selection of techniques, such as the five whys, the Ishikawa diagram or the fault tree, according to the type of case.
  • The documentation of the analysis, so that other people can review it.
  • Follow-up: confirming that the actions are implemented and work.

Ideas underpinning the method

A root cause is one whose correction prevents recurrence; it must be backed by evidence and not just by reasoning. The process distinguishes between the immediate cause, which triggers the event, and the underlying causes, linked to design, processes, organization or operating conditions.

What an engineer sees in practice

The standard helps structure the work and gives people a common language, but the result depends on the evidence gathered and the experience of those doing the analysis. In many organizations the greatest difficulty is not the technique but preserving the evidence in time and avoiding closing the investigation with the first plausible explanation.

When it is not enough

It does not replace specific technical expertise on the equipment being analyzed, or the mandatory investigation requirements in regulated sectors, such as those for accidents.

How to use this information

This guide describes the general scope only. The precise definitions and requirements must be consulted in the current edition of the document, obtained through official channels.

We do real tests, on video! Watch them on our YouTube channel →

Do you have a problem nobody has been able to measure?

Talk directly to the engineer in charge, with no middlemen.

Talk to an engineer