24/7 emergencies 814 777 6921812 230 6079WhatsApp 811 786 0768
Electrónica MonterreyElectrónica MonterreyLaboratorios Creativeit Talk to an engineer
Menu

What does IEC 61025 set out on fault trees?

IEC 61025 is an international standard that describes fault tree analysis: how to build the tree, which symbols to use and how to evaluate it qualitatively and quantitatively.

General scope

IEC 61025 deals with fault tree analysis, a deductive method that starts from an undesired event and breaks it down into combinations of causes. It establishes common terminology, symbols and guidance for building and evaluating the tree, so that analyses by different people are comparable.

What the standard covers

  • Definitions and symbols: top event, intermediate and basic events, logic gates and their graphical representation.
  • Building the tree: how to define the scope of the system, the initial conditions and the boundaries of the study.
  • Qualitative evaluation: obtaining the minimal cut sets, which identify the smallest combinations of failures capable of producing the top event.
  • Quantitative evaluation: estimating the probability or unavailability of the top event from the data on the basic events.
  • Presentation of results: what must be documented so that the analysis can be reviewed.

How it relates to other methods

A fault tree reasons from the consequences back to the causes, while failure modes and effects analysis goes from the components to the consequences. That is why they are used in a complementary way: the latter helps list the basic events and the former shows how they combine.

What an engineer sees in practice

The quantitative part is only as good as the input data. If the failure rates come from uncertain sources, the numerical result should be read as an order of magnitude for comparing alternatives, not as an exact prediction. And large trees are handled with specialized software.

When it does not apply well

Systems with strong time dependence, repairs or multiple states may require additional dynamic techniques.

How to use this information

This guide only summarizes the general scope. For specific requirements, definitions and exact symbols, consult the current edition of the standard through official channels.

We do real tests, on video! Watch them on our YouTube channel →

Do you have a problem nobody has been able to measure?

Talk directly to the engineer in charge, with no middlemen.

Talk to an engineer