24/7 emergencies 814 777 6921812 230 6079WhatsApp 811 786 0768
Electrónica MonterreyElectrónica MonterreyLaboratorios Creativeit Talk to an engineer
Menu

What is root cause analysis?

Root cause analysis is a method for finding the original condition that made a failure possible, so that the correction eliminates the problem and not just its symptom.

The central idea

Replacing the burned-out part resolves the stoppage, but it does not explain why the part burned out. If the condition that damaged it is still there, the failure will come back. Root cause analysis follows the chain of causes backward until it reaches something that can be acted on in a lasting way.

Symptom, direct cause and root cause

Level Example in a motor
Symptom The motor stops on a thermal trip.
Direct cause The winding insulation degraded from overheating.
Root cause The ventilation was blocked because the cleaning program did not cover that equipment.

The root cause usually lies in a process, a design decision or an operating condition, not in the part.

How it is carried out

  1. Define the failure: what happened, when and under what conditions.
  2. Gather evidence before altering anything: photographs, records, condition of the parts, maintenance history.
  3. Propose hypotheses and test them against the evidence, discarding those that do not fit.
  4. Follow the causal chain to a cause on which action can be taken.
  5. Define corrective actions and then verify that the failure does not return.

Common tools

The five whys, the Ishikawa diagram and the fault tree are ways of organizing the reasoning. None of them replaces evidence: a cause is a root cause only if the facts support it.

When there is no single answer

Many failures have several concurrent causes. A manufacturing defect can be harmless until it coincides with an overload. In those cases, all the contributions are documented and action is prioritized by its effect and ease, rather than forcing a single cause.

A good sign that you have gone far enough is that the proposed action changes a method, a design or a condition, and does not merely ask people to “be more careful”.

We do real tests, on video! Watch them on our YouTube channel →

Do you have a problem nobody has been able to measure?

Talk directly to the engineer in charge, with no middlemen.

Talk to an engineer