24/7 emergencies 814 777 6921812 230 6079WhatsApp 811 786 0768
Electrónica MonterreyElectrónica MonterreyLaboratorios Creativeit Talk to an engineer
Menu

How are energy production and its variability measured?

The energy production of a solar plant is measured with energy meters at the generation and interconnection points, and its variability is analyzed by comparing time series normalized for irradiation, because the solar resource changes with clouds, seasons and years.

What is measured and where

The energy produced is measured with energy meters at defined points: at the inverter outputs, at the substation or at the interconnection boundary with the grid. Each point includes different losses, so you must always state where the measurement is taken. The billing or delivery point is the one with contractual validity, and it is governed by the utility’s requirements.

How it is recorded

Inverters and meters accumulate energy and also log power at time intervals ranging from seconds to tens of minutes. A short interval shows the effect of clouds; a long one averages it out. The chosen resolution determines which phenomena can be seen. Equipment clocks must be synchronized so that data can be compared with irradiance.

Where the variability comes from

  • The resource: clouds, seasons and year-to-year variations in irradiation.
  • The system: temperature, soiling, shading, shutdowns and degradation.
  • The grid: power curtailment or disconnections due to grid conditions.
  • The measurement: data gaps, sensor errors and configuration changes.

How to separate what matters

Gross energy mixes resource and performance. To tell them apart, it is normalized for plane-of-array irradiation and for installed power, giving indicators such as specific yield and the performance ratio. If energy falls but the ratio holds, the cause was the resource; if the ratio falls, the cause lies in the system. Short-term power variability is studied with statistics on power ramps, which are relevant to grid integration.

What an engineer sees in practice

Plots of power against irradiance that form a tight cloud of points when the system is healthy, and spread out when there is curtailment, shading or faults. Series with gaps or frozen values are a sign of data acquisition problems.

Checks on meters and power connections must be carried out by qualified personnel in accordance with current regulations.

We do real tests, on video! Watch them on our YouTube channel →

Do you have a problem nobody has been able to measure?

Talk directly to the engineer in charge, with no middlemen.

Talk to an engineer