24/7 emergencies 814 777 6921812 230 6079WhatsApp 811 786 0768
Electrónica MonterreyElectrónica MonterreyLaboratorios Creativeit Talk to an engineer
Menu

What is irradiance and how is it expressed?

Irradiance is the power of solar radiation striking a surface per unit area and is expressed in watts per square meter; its integral over time is irradiation, in energy per unit area.

Short answer

Irradiance is power per unit area: how much energy per second reaches each square meter. It is expressed in watts per square meter, W/m². It is the factor that most determines what a module produces, because the photogenerated current is almost proportional to it.

Irradiance and irradiation

These are different quantities that are often confused. Irradiance is instantaneous, a power. Irradiation is the energy accumulated over an interval, the integral of irradiance over time, and is typically expressed in kilowatt-hours per square meter or as equivalent peak sun hours. To estimate daily or annual energy production, use irradiation; to explain how a module is behaving at this instant, use irradiance.

Components of radiation

  • Direct: radiation arriving in a straight line from the solar disk.
  • Diffuse: radiation scattered by the atmosphere and clouds, arriving from the whole sky.
  • Reflected: radiation bouncing off the ground and surroundings, important for bifacial modules.
  • Global: the sum of the above on a given surface.

Why it depends on orientation

Irradiance on a module depends on its tilt and orientation relative to the sun, the angle of incidence and the air mass the radiation passes through. That is why a distinction is made between irradiance on the horizontal plane and plane-of-array irradiance, which is the one relevant to production. Measuring in the wrong plane produces a meaningless comparison.

What an engineer sees in practice

Irradiance is measured with pyranometers or reference cells and logged together with temperature. It changes quickly with clouds, and the performance of a module or plant is normalized to it for comparison. Module power specifications refer to a reference irradiance defined in the standard test conditions, which the manufacturer declares.

How to interpret a reading

An irradiance reading is only useful with its plane, its instrument and its time. Without that information it is of no use for evaluating a system.

We do real tests, on video! Watch them on our YouTube channel →

Do you have a problem nobody has been able to measure?

Talk directly to the engineer in charge, with no middlemen.

Talk to an engineer