24/7 emergencies 814 777 6921812 230 6079WhatsApp 811 786 0768
Electrónica MonterreyElectrónica MonterreyLaboratorios Creativeit Talk to an engineer
Menu

What does OSHA 1910.146 require?

OSHA 1910.146 regulates entry into permit-required confined spaces in general industry in the United States: it requires employers to identify them, control their hazards and organize entry with roles, a permit and rescue.

What it regulates and who it applies to

1910.146 is the US regulation for permit-required confined spaces in general industry. Construction is governed by its own provision. In Mexico the subject is addressed by the STPS Mexican official standard on confined spaces, so 1910.146 is usually used as a comparative technical reference and not as a local legal obligation, unless the project requires it by contract.

The logic of the standard

The standard starts from two definitions. A confined space is one large enough for a person to enter, with limited means of entry or exit, and not designed for continuous occupancy. It becomes a permit-required confined space when it also presents a serious hazard: a hazardous atmosphere, a risk of burial or engulfment by a material, a geometry that traps, or any other recognized serious hazard.

The reasoning is simple: inside a space like this, a small mistake has no easy way out and rescue is difficult. That is why the standard requires the work to be thought through before entering, not improvised along the way.

Elements it requires

  • Workplace evaluation: identifying which spaces exist and which ones require a permit.
  • A written program where permit spaces exist, and signage that prevents unauthorized entry.
  • Permit system: a document that records the space, the purpose, the hazards, the control measures, the atmospheric tests and who authorizes the entry.
  • Defined roles: authorized entrant, attendant and entry supervisor, each with specific duties.
  • Atmospheric testing and monitoring with calibrated instruments, before and during entry.
  • Ventilation and isolation of energy sources and of lines that could introduce hazards.
  • Rescue services available, and training for personnel.

What an engineer sees in practice

At the plant this translates into a signed permit form, a gas detector with a test record, an attendant at the entry opening in communication with whoever is inside, lockout of valves and energy sources, and a rescue plan defined in advance. When the only hazards in a space are ones that are eliminated or continuously controlled, the standard provides for alternate procedures and the possibility of reclassifying it, always documented.

How to use this reference

This text only summarizes the general scope. The exact requirements, exceptions and definitions must be read in the current edition of the regulation and in the applicable local standard. Work in confined spaces must be carried out by qualified, trained personnel, following current safety regulations.

We do real tests, on video! Watch them on our YouTube channel →

Do you have a problem nobody has been able to measure?

Talk directly to the engineer in charge, with no middlemen.

Talk to an engineer