Confined and permit-required are not the same
Every permit-required space is confined, but not every confined space requires a permit. The difference lies in the hazard. If the space is merely narrow and presents no serious threats, it can be managed with less strict controls. If it has any of the hazards described below, entry is conditional on a permit documenting that someone has reviewed the conditions and authorized the work.
What makes it a permit space
- Hazardous atmosphere, existing or potential: lack or excess of oxygen, flammables, toxics.
- Material that can engulf or trap the entrant, such as grain, sand or liquids.
- Entrapping geometry: inwardly converging walls or a sloping floor that tapers to a smaller section.
- Any other recognized serious hazard: uncontrolled electrical or mechanical energy, high temperatures, corrosive products, among others.
One of these is enough. The hazard may be potential: if the space could develop a hazardous atmosphere because of its contents or the work, it is treated as if it already had one until proven otherwise.
Why a permit is required
The permit is not a formality: it is the mechanism that forces specific questions to be answered before entry. Has the space been isolated? Has the atmosphere been measured, and with what instrument? Who is monitoring from outside? How would someone be rescued? How long is the authorization valid? If any answer is missing, there is no entry.
Reclassification
Under some regulatory schemes, a permit space can be managed with reduced requirements if it is shown that the only hazard is the atmosphere and that continuous ventilation is enough to keep it in safe condition, with measurements to prove it. This requires documentation and does not apply when another hazard exists. If conditions change, the space goes back to the full classification.
What the engineer sees in the field
The visible signs are a sign at the access point, an entry and exit log, an attendant at the opening of the space and a rescue team standing by. If any of these elements is missing, the space is being treated as if no permit were required.
When the exception does not apply
When work generates contaminants, such as welding or cleaning with solvents, or when the source of the hazard cannot be eliminated, the space remains a permit space. The exact criteria depend on the current regulations, which should be consulted, and entry must be made by trained and authorized personnel.
This guide is for information only. Work involving electrical risk, heights or hazardous atmospheres must be carried out by qualified and authorized personnel, following the applicable regulations.