A definition with three components
Being qualified is not a title obtained once that serves for everything. The definition combines three elements: knowledge of the installations and equipment involved in the task, the ability to identify hazards and assess risk, and authorization from the employer. If one is missing, the person is not qualified for that job, even with years in the trade.
Why it is defined by task
A person can be qualified to change a lamp on a de-energized circuit and not be qualified to work on a medium-voltage panel. The hazards, techniques and protective equipment are different. That is why qualification is defined in relation to the equipment, voltages and tasks the person is authorized to perform.
What they must be able to do
- Distinguish energized parts from those that are not, and verify their state.
- Determine the applicable approach distances and working conditions.
- Select and correctly use personal protective equipment, insulated tools and test instruments.
- Apply lockout and tagout procedures and verify the absence of voltage.
- Respond to an emergency, including first aid.
Qualified versus unqualified
| Aspect | Qualified personnel | Unqualified personnel |
|---|---|---|
| Work on energized equipment | Only if authorized and with the applicable risk controls | Does not intervene; stays out of the danger zone |
| Hazard recognition | Identifies and assesses the risk of the task | Recognizes basic signs and reports them |
| Supervision | Can work autonomously within their scope | Requires someone else to control access |
How it is demonstrated
Normally through documented training, practical assessment, verifiable experience and a formal designation. The applicable Mexican regulations and the workplace’s internal procedures determine the exact requirements; it is advisable to consult the current edition.
What it does not mean
It does not mean the person can skip procedures, work alone in any situation or do without protection. Qualified personnel are the ones who best understand why those barriers exist, and they respect them. All work on electrical installations must be done by qualified and authorized personnel, following the applicable regulations.