24/7 emergencies 814 777 6921812 230 6079WhatsApp 811 786 0768
Electrónica MonterreyElectrónica MonterreyLaboratorios Creativeit Talk to an engineer
Menu

What is an insulated hot stick?

An insulated hot stick is a long-handled tool made of dielectric material that makes it possible to operate, test or handle energized equipment while keeping a safe distance between the hands and live parts.

Definition and function

An insulated hot stick, also called a switch stick, is a long tube or rod of non-conductive material, usually resin-impregnated fiberglass, with one end for the operator to hold and another where a tool attaches. Its function is to increase the distance and place insulation between the person and the energized point.

What it is used for

  • Opening and closing blade switches or disconnectors.
  • Installing and removing temporary grounds.
  • Positioning voltage detectors to verify the absence of voltage at medium and high voltage.
  • Installing insulating covers or blankets on nearby parts.
  • Carrying out switching in substations and on lines from the ground.

How it protects

The handle of dielectric material limits the current that could reach the hand through contact with the upper end, and the length keeps the operator outside the zone closest to the conductor. It also protects in the event of an arc, because it increases the distance from the event. Hot sticks can be telescopic, made of coupling sections or fixed.

Heads and accessories

These are interchanged according to the task: hooks, clamps, adapters for operating rings, detector holders and ground connectors. Each accessory must be compatible with the hot stick and with the equipment on which it is used.

What to look after

  1. Cleaning: dirt, moisture or contamination on the surface reduce the insulation. It is cleaned and dried according to the manufacturer’s instructions.
  2. Inspection: look for fissures, splintering, burns, color changes and damage to the hardware.
  3. Storage: in a container or rack that keeps it straight and dry, away from knocks, heat and moisture.
  4. Periodic dielectric tests according to the manufacturer and the regulations.

Limits

A hot stick is suitable only for the voltage level indicated by its manufacturer and only along its insulating section, respecting the marked grip limit. In damp conditions, rain or dirt, its insulating capacity can decrease. These operations must be carried out by qualified personnel following the applicable regulations.

We do real tests, on video! Watch them on our YouTube channel →

Do you have a problem nobody has been able to measure?

Talk directly to the engineer in charge, with no middlemen.

Talk to an engineer