24/7 emergencies 814 777 6921812 230 6079WhatsApp 811 786 0768
Electrónica MonterreyElectrónica MonterreyLaboratorios Creativeit Talk to an engineer
Menu

How should insulating gloves be cared for and stored?

Insulating gloves are kept clean, dry and free of folds, away from sunlight, heat, ozone, oils and sharp objects, and are stored in a suitable container that keeps them in their natural shape.

Why storage matters

Insulating gloves are made of elastomers. This material ages through environmental agents: ultraviolet light, ozone, heat and certain chemicals harden, crack or weaken it, sometimes without any change visible to the naked eye. A poorly stored glove can lose its insulating capacity without leaving obvious signs.

Storage conditions

  • Away from sunlight and intense lamps: ultraviolet radiation degrades rubber.
  • Away from heat: not near radiators or motors, nor in closed vehicles in the sun.
  • Free of ozone: avoid areas with sparking electric motors, high-voltage equipment or nearby welding, all of which generate ozone.
  • No contact with oils, solvents or greases: they cause the rubber to swell or soften.
  • In their natural shape: not folded, rolled, compressed or hung by the fingers. Folds create stress points.
  • Dry and clean: moisture promotes contamination and deterioration.

How to store them

Ideally use a bag or box designed for gloves, with the cuff facing up so that they are not crushed. Avoid storing them mixed with tools, sharp points or edges. For transport, use the same container and avoid leaving it in the open bed of a pickup truck.

Cleaning

Wash them with warm water and mild soap according to the manufacturer’s instructions, rinse them and air-dry them away from direct heat sources. Do not use solvents; if talc is used, it must be the recommended type so as not to damage the material.

Leather protector glove

Leather protectors go on top to prevent cuts and abrasion; they are stored and inspected together with the gloves. If the leather has embedded objects or is damaged, it is replaced.

Signs for removal

  1. Fine cracks when gently stretched.
  2. Sticky or hardened areas.
  3. Cuts, punctures or blisters.
  4. Expired electrical test date.

Maintenance and periodic testing are defined by the manufacturer and the applicable regulations. Electrical work must be carried out by qualified personnel.

We do real tests, on video! Watch them on our YouTube channel →

Do you have a problem nobody has been able to measure?

Talk directly to the engineer in charge, with no middlemen.

Talk to an engineer