Central idea
The most effective way to avoid an electrical accident is to take energy out of the equation. An electrically safe work condition means that the equipment to be worked on has been brought to a verified state of absence of energy, through a formal process, and that it stays that way for the duration of the work. It is the state that replaces working on energized equipment, which should only be done when de-energizing is not possible or creates a greater risk.
Elements of the process
- Identify all energy sources: multiple feeds, backfeeds, local generation, capacitors and stored energy.
- Open the disconnecting devices and control residual or stored energy.
- Lock out and tag out each disconnection point, so that no one can re-energize without authorization.
- Verify the absence of voltage with a suitable instrument, tested before and after on a known source to confirm that it works.
- Ground the conductors when there is a risk of re-energization or induced voltages.
Why it is verified with an instrument
An open switch or a panel indicator does not prove the absence of voltage: they can fail or be mislabeled, or there may be another feed. Only direct measurement at the point of work, after disconnecting, confirms the state.
What the engineer sees
A written procedure, with identified responsible persons, personal locks and tags, a record of the verification and a restoration procedure at the end, which includes removing tools, grounds and people before re-energizing.
When it does not exist
If accessible energized parts remain after the process is applied, the work is not taking place in an electrically safe condition, and a risk analysis, authorization and additional protection are required.
These activities must be carried out by qualified personnel, following the applicable regulations and the facility’s procedures; this guide only explains the concept.