What is sought
Structures such as floors, footbridges, platforms or buildings respond to dynamic forces with movements that can cause discomfort, fatigue or damage. Evaluating the vibration means knowing how much the structure moves, at what frequencies and why.
Natural frequencies
Every structure has natural frequencies at which it responds most easily. If a source of excitation, such as a machine, people walking or the wind, coincides with one of them, resonance appears and the response grows. Identifying those frequencies is the first step in understanding the problem.
How it is measured
- Select accelerometers with good low-frequency response and sufficient sensitivity for small levels.
- Locate the points where the greatest movement is expected, such as the middle of a span, and reference points in stiff areas.
- Measure in all three directions when the dominant movement is not known.
- Record during the usual excitation and, if possible, with a controlled excitation.
Forms of excitation
- Ambient vibration: the response to natural forces is measured without controlling the input.
- Impact: a blow with an instrumented hammer or mass.
- Harmonic excitation: with an adjustable-frequency shaker.
How to interpret the result
The natural frequencies are compared with those of the known sources, and the measured levels with the criterion applicable to the use of the structure: human comfort, protection of sensitive equipment or structural integrity. If there is resonance, the solutions involve changing the stiffness or the mass, isolating the source or adding damping.
When it does not apply
A structural safety evaluation cannot be settled with vibration measurements alone; it must be carried out by structural specialists.