24/7 emergencies 814 777 6921812 230 6079WhatsApp 811 786 0768
Electrónica MonterreyElectrónica MonterreyLaboratorios Creativeit Talk to an engineer
Menu

Rigid or flexible substrate for high-frequency circuits?

A rigid substrate offers better dimensional stability, impedance control and heat dissipation, while a flexible one can be folded and integrated into curved geometries, at the cost of greater sensitivity to deformation and moisture at high frequency.

What changes on flexing

At high frequency, the line geometry and the permittivity of the material determine the impedance and the propagation velocity. A rigid substrate keeps that geometry fixed. A flexible one changes it when it bends, and that variation affects phase and matching, especially as frequency increases.

Advantages of the rigid substrate

  • Stable thickness and flatness, which gives a predictable impedance.
  • Greater mechanical rigidity for mounting heavy components and connectors.
  • Better heat conduction through the thickness, depending on the material.
  • A wide choice of low-loss materials, laminates with ceramic or PTFE reinforcement.

Advantages of the flexible substrate

  • It conforms to curved surfaces and to moving mechanisms.
  • It reduces connectors and cables, and with them discontinuities.
  • Lower weight and thickness.

Limitations of flexible substrates

Common flexible dielectrics, such as polyimides, can absorb more moisture than low-loss rigid laminates, and that raises permittivity and losses depending on the environment. Thin layers make the lines more sensitive to thickness variations. Curvature and repeated flexing modify the impedance and can fatigue the copper. There are flexible liquid crystal polymer materials with better performance in moisture and losses, although their processing is more specialized.

Decision criteria

  1. Frequency band and allowable insertion loss.
  2. Whether flexing occurs only at installation or dynamically throughout the service life.
  3. Humidity and temperature environment.
  4. Shielding and controlled impedance needs.
  5. Hybrid options, with rigid zones and flexible zones.

What the engineer sees

In a flexible link, the return loss measurement can vary depending on how the circuit is bent. That dependence indicates that the design must specify the bend radius and be verified in that condition.

We do real tests, on video! Watch them on our YouTube channel →

Do you have a problem nobody has been able to measure?

Talk directly to the engineer in charge, with no middlemen.

Talk to an engineer