What it delivers
The result is a spectrum: real permittivity and losses (or loss tangent) as a function of frequency, often repeated at several temperatures. Unlike a single-point measurement, the spectrum shows which physical processes occur in the material and on what timescale.
What an instrument of this type contains
- A phase-sensitive generator and detector, covering a very wide frequency range, from very low frequencies up to radio frequency depending on the model.
- A measurement interface for samples with low capacitances and high impedances.
- Interchangeable sample holders and, often, a thermal chamber with temperature control.
How to read the spectrum
Each mechanism leaves a recognizable signature:
- Free-charge conduction: at low frequencies, losses increase as frequency decreases, with a characteristic slope on a logarithmic scale.
- Interfacial polarization: appears in heterogeneous materials, with charges that accumulate at interfaces and give very high apparent permittivities at low frequency.
- Dipolar relaxation: a step in the real permittivity accompanied by a peak in the losses. As temperature rises, the peak shifts to higher frequencies.
- Atomic and electronic resonances: at much higher frequencies, beyond the reach of many analyzers.
What is done with the data
Fitting relaxation models, for example of the Debye type or its generalizations, makes it possible to extract relaxation times and their variation with temperature. This is used to study glass transitions, degree of cure, moisture absorption or aging. The temperature of a relaxation usually follows an Arrhenius or Vogel-type relationship, depending on the process.
Care
- Reproducible electrical contact and geometry.
- Separate the electrode effects, which at low frequency can be mistaken for material properties.
- Keep the sample dry and stable during the sweep.
How to interpret the result
A change between batches or after aging shows up as a shift or a change in the height of the peaks. Interpret it by comparison with a reference of the same material measured with the same setup.