24/7 emergencies 814 777 6921812 230 6079WhatsApp 811 786 0768
Electrónica MonterreyElectrónica MonterreyLaboratorios Creativeit Talk to an engineer
Menu

What does the IEC 60529 IP code classify?

The IEC 60529 IP code classifies the degree of protection an enclosure provides against access to hazardous parts, the ingress of solid objects and the ingress of water, but not against other hazards.

What the IP code is

IP stands for ingress protection. IEC 60529 defines a designation system that indicates the extent to which an enclosure, such as a housing or an electrical cabinet, protects against the penetration of solid bodies and water, and against access to hazardous parts by hand or with tools.

How it is structured

The code consists of the letters IP followed by two characteristic numerals and, optionally, additional and supplementary letters.

  • First numeral: protection against solids and against access to hazardous parts. It increases with the fineness of the object kept out, up to dust.
  • Second numeral: protection against water, from vertical drops to jets and various types of immersion.
  • Additional letter: indicates the degree of protection of persons against access to hazardous parts when it is higher than that expressed by the first numeral.
  • Supplementary letter: complementary information, such as whether the test was carried out with the equipment in motion.

When a numeral is not specified it is replaced by an X, which means it has not been classified.

What it does not classify

The code does not cover corrosion, explosive atmospheres, radiation, condensed moisture, impact damage or temperature. Nor does it guarantee that the product will work properly after a heat and cold cycle, because seals degrade. The water numerals are not cumulative in every case: a part with protection against immersion is not automatically suitable for high-pressure jets, and the definition of each numeral must be consulted.

What the engineer sees

The rating is obtained through tests under defined conditions: access probes, dust chambers, dripping, rain, jets and immersion, with the equipment in a specified condition. The result is declared with the designation and holds as long as the product does not change in its gaskets, cable entries or connectors. Any design modification can invalidate the rating.

How to use it

When specifying a product, it is advisable to describe the real environment and translate it into a code, rather than choosing the highest one. For details of each numeral and the procedures, the current edition of the standard must be consulted.

We do real tests, on video! Watch them on our YouTube channel →

Do you have a problem nobody has been able to measure?

Talk directly to the engineer in charge, with no middlemen.

Talk to an engineer