24/7 emergencies 814 777 6921812 230 6079WhatsApp 811 786 0768
Electrónica MonterreyElectrónica MonterreyLaboratorios Creativeit Talk to an engineer
Menu

Gauge or absolute pressure for an application?

Gauge pressure is chosen when the difference from the surroundings matters, and absolute pressure when the value relative to vacuum matters; the key is whether variation in atmospheric pressure affects what you want to know.

The key question

Does your application depend on pressure relative to the surroundings, or on the pressure itself? If what matters is the stress on a wall, the thrust of a cylinder or the pressure in a pneumatic or hydraulic line, the natural reference is the atmosphere. If what matters is the thermodynamic state of the gas, absolute pressure is needed.

When gauge pressure is the right choice

  • Stress in vessels and piping relative to the outside.
  • Pneumatic and hydraulic systems where the actuator works against the atmosphere.
  • Pumping pressure and process line pressure in medium and high ranges.
  • Hydrostatic levels in open tanks.

When absolute pressure is the right choice

  • Vacuum, where the pressure must be expressed independently of the weather.
  • Processes where absolute pressure determines properties, such as boiling point, gas density or gas mass flow.
  • Barometric pressure measurement.
  • Low ranges, where atmospheric variation would be comparable to the signal.

Effect of atmospheric pressure

Atmospheric pressure changes with the weather and with altitude. A gauge sensor vented to atmosphere tracks it and subtracts it, which is good if you want relative pressure, but it means that a change in the weather does not affect its reading. An absolute sensor, by contrast, includes that variation. In a low range, that variation can look like instrument drift even though it is real.

Comparison

Situation Natural choice
Compressed air line Gauge
Vacuum chamber Absolute
Barometer or altimeter Absolute
Open tank with hydrostatic level Gauge
Gas mass flow from pressure Absolute
Low pressure close to ambient Depends on whether you want to track or subtract the atmosphere

An example

A wide-range absolute sensor on a low-pressure line loses resolution, because part of its range is spent representing atmospheric pressure. A lower-range gauge sensor makes better use of its scale.

What the engineer sees

Readings that move with the weather, a zero that does not correspond to zero at atmosphere, or figures that differ from another instrument by exactly atmospheric pressure indicate that references have been mixed. When specifying, always state the type of pressure, not just the range.

We do real tests, on video! Watch them on our YouTube channel →

Do you have a problem nobody has been able to measure?

Talk directly to the engineer in charge, with no middlemen.

Talk to an engineer