24/7 emergencies 814 777 6921812 230 6079WhatsApp 811 786 0768
Electrónica MonterreyElectrónica MonterreyLaboratorios Creativeit Talk to an engineer
Menu

Piezoresistive or capacitive pressure sensor?

A piezoresistive sensor measures diaphragm deformation with gauges whose resistance changes, and a capacitive sensor with the change in capacitance between diaphragm and plate; the former is rugged and general-purpose, and the latter stands out at low and differential pressures.

Two ways of reading the same diaphragm

Both principles measure the deformation of a diaphragm subjected to pressure. What changes is how that deformation is converted into an electrical signal, and their strengths derive from that.

Piezoresistive

Gauges whose resistance changes when deformed are diffused or deposited on the diaphragm, which is normally silicon. They are connected in a Wheatstone bridge, and its imbalance is the signal. The sensor is made with microelectronics techniques, which lowers the cost of volume production.

  • Covers a wide range of pressures, including high ones.
  • Fast response.
  • The signal depends on temperature, so it requires compensation.

Capacitive

The diaphragm is one plate of a capacitor and, as it deforms, the distance to a fixed plate changes and, with it, the capacitance. The electronics convert that variation into a signal.

  • Very good sensitivity in low pressure ranges.
  • Suitable for low-value differential measurements and for zero stability.
  • Requires nearby electronics, and is sensitive to stray capacitance and to moisture in the sensor.

Comparison

Aspect Piezoresistive Capacitive
Principle Change in gauge resistance Change in capacitance
Typical range Wide, toward high pressures Stands out at low and differential pressures
Temperature effect Significant, compensated Generally smaller, also compensated
Overpressure Depends on the design Depends on the design; some diaphragms rest against a support
Electronics Simple More elaborate

How to choose

  1. Define the range and the type of pressure: gauge, absolute or differential.
  2. For high pressures or general, rugged applications, the piezoresistive principle is usually the starting point.
  3. For low pressures or small differentials, and when zero stability matters, consider the capacitive principle.
  4. Check the behavior under overpressure, temperature and the fluid: certain designs need isolation or a diaphragm seal.

When this rule does not apply

The differences depend largely on the design and the manufacturer: a well-compensated sensor of one principle can outperform a poorly executed sensor of the other. For that reason, the data sheet with stability, temperature effect and overpressure is more decisive than the principle alone.

We do real tests, on video! Watch them on our YouTube channel →

Do you have a problem nobody has been able to measure?

Talk directly to the engineer in charge, with no middlemen.

Talk to an engineer