24/7 emergencies 814 777 6921812 230 6079WhatsApp 811 786 0768
Electrónica MonterreyElectrónica MonterreyLaboratorios Creativeit Talk to an engineer
Menu

What is the difference between accuracy, precision and repeatability?

Accuracy indicates how close a measurement is to the true value; precision, how close several repeated measurements are to one another; repeatability is precision under the same conditions and over a short period.

These are three distinct ideas that are often confused. Accuracy concerns the deviation from the true value, precision concerns the dispersion of the results, and repeatability is a particular case of precision under controlled conditions. An instrument can be very precise and yet inaccurate, and that is exactly what calibration helps to uncover.

The target analogy

Imagine several shots at a target. If they land grouped together but far from the center, there is precision without accuracy: a systematic error shifts the whole group. If they land scattered around the center, the mean is correct but there is little precision: random error dominates. If they land grouped at the center, you have both.

Concept What it compares Dominant effect
Accuracy Result against the true or reference value Systematic error
Precision Results against each other Random error
Repeatability Results with the same method, operator, instrument and conditions, over a short time Minimum possible variation

What the engineer sees in practice

When you measure the same part ten times, the dispersion of the readings shows the repeatability. If the mean deviates from the value given by a reference standard, the problem is one of accuracy. The former is reduced by averaging or improving the method; the latter is corrected by calibration and adjustment, or by applying a known correction.

Why it is not the same as resolution

Resolution is the smallest change the indicator can show. Many digits on the display guarantee neither accuracy nor precision: they only describe how the reading is presented. A high-resolution indicator can show a wrong value in great detail.

When each one matters

To control a process that only needs to detect relative changes, precision may be enough. To compare against an absolute specification or exchange results with third parties, accuracy and its traceability are essential. Modern metrological vocabulary also uses the term trueness for the systematic component, but the idea is the same.

We do real tests, on video! Watch them on our YouTube channel →

Do you have a problem nobody has been able to measure?

Talk directly to the engineer in charge, with no middlemen.

Talk to an engineer