24/7 emergencies 814 777 6921812 230 6079WhatsApp 811 786 0768
Electrónica MonterreyElectrónica MonterreyLaboratorios Creativeit Talk to an engineer
Menu

What Is a Symbol in Digital Communications?

A symbol is the signal unit a digital system transmits during a fixed interval; each symbol represents one or more bits depending on how many distinct states it can take.

Definition

To send digital information over a physical channel, the transmitter modifies some feature of a carrier, such as amplitude, phase or frequency, and holds that modification for a short interval. Each distinct value the signal adopts during an interval is a symbol. In each interval the receiver decides which of the possible symbols was sent and recovers the bits from it.

Symbols and bits

If the system uses M distinct symbols, each symbol carries log base 2 of M bits. With two states, one symbol equals one bit. With four, as in QPSK, it equals two bits. With sixteen, as in 16-QAM, four. That is why increasing the number of states allows more bits to be sent in the same bandwidth.

Symbol rate and bit rate

Symbol rate, measured in bauds or symbols per second, is how many symbols are sent per second. Bit rate is the symbol rate multiplied by the bits per symbol. The occupied bandwidth depends mainly on the symbol rate and the pulse-shaping filter, not on the number of bits each symbol carries. Doubling the bits per symbol doubles the data rate without widening the bandwidth.

The price of more bits per symbol

The states end up closer together on the constellation plane, which shows the amplitude and phase of each possible symbol. At the same power level, noise makes it easier to confuse a symbol with its neighbor. That is why high-order modulations require a better signal-to-noise ratio, and why systems switch to lower modulations when the link worsens.

What an engineer sees on the instrument

On a vector signal analyzer or an oscilloscope with demodulation, the constellation diagram appears: each point is a received symbol. If the points form compact clouds at the ideal positions, the link is clean. Scattered clouds indicate noise, and rotations or deformations point to phase errors, amplitude imbalance or distortion. Error vector magnitude measures how far each symbol is from its ideal position.

Symbol should not be confused with bit: a system with a low symbol rate can have a high bit rate if each symbol carries many bits.

We do real tests, on video! Watch them on our YouTube channel →

Do you have a problem nobody has been able to measure?

Talk directly to the engineer in charge, with no middlemen.

Talk to an engineer