24/7 emergencies 814 777 6921812 230 6079WhatsApp 811 786 0768
Electrónica MonterreyElectrónica MonterreyLaboratorios Creativeit Talk to an engineer
Menu

What does dBi mean?

dBi means decibels relative to an isotropic radiator: it expresses, on a logarithmic scale, how many times the antenna concentrates power in one direction compared with an ideal antenna that radiates equally in all directions.

The meaning

The decibel expresses a power ratio on a logarithmic scale. The i in dBi indicates that the reference is the isotropic radiator, the ideal antenna that radiates equally in all directions. A gain of several dBi means that, in its direction of maximum radiation, the antenna produces a higher power density than the isotropic radiator would with the same input power. Each increase of three decibels is roughly equivalent to doubling the power, and ten decibels to multiplying it by ten.

How it is used in a link calculation

Because decibels are logarithmic, gains and losses are added and subtracted. A link budget takes the transmitter power, subtracts cable and connector losses, adds the transmitting antenna gain, subtracts the propagation loss and adds the receiving antenna gain. All gains must be referred to the same base, and for antennas that base is usually dBi.

How it differs from dBd

The dBd uses a half-wave dipole as its reference. Because the dipole already concentrates some energy relative to the isotropic radiator, a given value in dBd corresponds to a larger number of dBi. Two manufacturers may present values that look different simply because they use different references, so the unit must be read carefully.

Common mistakes

  • Assuming that more dBi means more range in all circumstances. Gain is achieved by narrowing the beam, and a poorly aimed high-gain antenna performs worse than a well-oriented low-gain one.
  • Comparing values in dBi and dBd without converting them.
  • Forgetting that gain is a value in one direction, normally the maximum, not an average.
  • Ignoring efficiency: gain already includes it, but directivity does not.

How to interpret a value

An omnidirectional antenna with more dBi usually has a narrower vertical beam. To know how useful it is in an installation, you need to look at the complete pattern, not just the number on the datasheet.

We do real tests, on video! Watch them on our YouTube channel →

Do you have a problem nobody has been able to measure?

Talk directly to the engineer in charge, with no middlemen.

Talk to an engineer