24/7 emergencies 814 777 6921812 230 6079WhatsApp 811 786 0768
Electrónica MonterreyElectrónica MonterreyLaboratorios Creativeit Talk to an engineer
Menu

What Causes the Multipath Effect?

Multipath occurs when the signal reaches the receiver by several paths (direct, and reflected or diffracted by buildings, the ground or objects), and the copies, with different delays and phases, add or subtract, producing fading and intersymbol interference.

How it arises

A wave emitted by an antenna rarely reaches the receiver only along a straight line. Part of the energy is reflected by the ground, buildings, vehicles or metal structures, diffracted at edges or scattered by rough surfaces. Each path has a different length and therefore a different delay and phase. The receiver sees the sum of all the copies.

What it produces

  • Fading: when the copies arrive in phase opposition they partly cancel and the level drops. If they arrive in phase they reinforce each other. Moving the antenna a fraction of a wavelength can change the level appreciably.
  • Frequency selectivity: the delay between paths causes cancellation at some frequencies and not at others, which distorts the wideband response.
  • Intersymbol interference: in digital communications, the echo of a previous symbol overlaps the next one when the delay is comparable to the symbol duration.
  • Position errors: in radio-based positioning systems, a reflected path lengthens the apparent distance.

What the engineer sees

In a capture of level against position or frequency, multipath appears as rapid, deep ripples, not as a smooth drop. In a measured radiation pattern, it generates ripple that does not belong to the antenna. On a mobile link, the level fluctuates with movement.

How it is mitigated

  1. Use antenna diversity, with antennas spaced apart or with different polarizations, because the probability of both suffering the same fade is lower.
  2. Use directional antennas, which reduce echoes from directions outside the beam.
  3. Choose modulations and schemes that are robust to delay, such as those that divide the channel into many subcarriers.
  4. Equalize at the receiver to compensate for the channel response.

When it is an advantage

It is not always harmful: in urban environments without line of sight, reflections allow the signal to reach the receiver. That is why the application determines whether it should be fought or exploited.

We do real tests, on video! Watch them on our YouTube channel →

Do you have a problem nobody has been able to measure?

Talk directly to the engineer in charge, with no middlemen.

Talk to an engineer