24/7 emergencies 814 777 6921812 230 6079WhatsApp 811 786 0768
Electrónica MonterreyElectrónica MonterreyLaboratorios Creativeit Talk to an engineer
Menu

What Is a Balun Used For?

A balun is used to connect an unbalanced line, such as a coaxial cable, to a balanced antenna or load, preventing common-mode currents from flowing on the cable shield and altering the pattern and impedance.

The problem it solves

A coaxial cable is unbalanced: the signal travels between the center conductor and the shield, and the shield is also connected to ground or to the equipment reference. A balanced antenna, such as a dipole, feeds its two arms with equal and opposite currents. If the coax is connected directly to a dipole, one arm is tied to the shield and the other to the center conductor, and the system loses its symmetry: part of the current returns along the outside of the shield, which becomes a third radiating element.

What the balun does

The name comes from balanced to unbalanced. The balun forces equal and opposite currents in the antenna and presents a high impedance to the common-mode path on the shield, which prevents current from flowing along the outside of the cable. Some baluns also transform impedance, for example from one line to another with a different ratio.

How to recognize that one is missing

  • The radiation pattern is distorted and changes when the cable is moved or touched.
  • The measured antenna impedance varies when the length of the test cable is changed.
  • Higher emissions or interference appear from cable radiation, which matters in electromagnetic compatibility testing.
  • The front-to-back ratio worsens unexpectedly.

Common types

  • Transmission-line type with a ferrite core: coils of cable on ferrite that behave as a common-mode choke.
  • Quarter-wave or sleeve type: resonant structures with a narrower band.
  • Transformer type: isolate and match impedance with windings.

What to consider when choosing one

The balun must work in the band of use and handle the expected power without saturating the core, because saturation generates distortion and losses. Like any line component, it introduces insertion loss that must be included in gain or sensitivity calculations.

We do real tests, on video! Watch them on our YouTube channel →

Do you have a problem nobody has been able to measure?

Talk directly to the engineer in charge, with no middlemen.

Talk to an engineer