What it is for
An antenna’s radiation pattern describes how its signal changes with direction. To measure it, the antenna has to be pointed successively at different angles relative to a fixed probe antenna. The positioner makes that rotation in a repeatable, controlled way while a receiver records the signal level at each position.
Axes and configurations
- Single axis (azimuth): enough for cuts in one plane, such as the horizontal pattern of a tower antenna.
- Two axes: allow the sphere of directions to be swept. A common configuration combines an elevation axis with an azimuth axis.
- Polarization rotation: an additional axis rotates the antenna about its line of sight to measure polarization.
The axes are mounted in different combinations, and each one changes how the antenna moves relative to the probe and what portion of the sphere it covers without obstruction.
What determines its quality
- Angular accuracy and repeatability: a position error becomes a level error, especially on the flanks of the lobe, where the signal changes quickly.
- Center of rotation: the antenna must rotate about a well-chosen point, normally close to the phase center.
- Stiffness and load: the positioner must support the weight of the antenna without vibrating or flexing.
- Electromagnetic behavior: the mast and motors are nearby metal objects that can reflect, so they are covered with absorber.
Integration with the measurement
The positioner is synchronized with the receiver or analyzer so that each reading is associated with an angle. Software controls the sweeps and stores the pattern. Cables crossing the rotary joints must be flexible and stable, because their movement can change phase and amplitude during rotation.
What to check first
Before measuring, verify that the mechanical axis and the antenna axis are aligned with the direction toward the probe, and that the antenna is firmly secured.